Table of Contents
Advertisement
GENERAL OPERATION
LIQUID CRYSTAL DISPLAY
Exhibit current frequency and activated
functions on the display of the front
panel.
RESET FUNCTION
RESET button is placed on the front
panel and must be activated with either
a ballpoint pen or thin metal object. The
reset button is to be activated for the
following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
Note: if press RESET button, the unit
can't work yet, please use a cotton swab
soaked in isopropyl alcohol to clean the
socket on the front panel.
LAST PLAY MEMORY
• During disc playback, if you press
button on the front panel or
button on the remote control to turn
off the unit and then press the button
again to turn on the unit, the DVD unit
will resume playing from the point that
just interrupted.
• During disc playback, if you press
MODE button to switch to radio mode,
TV mode or AV mode, then return to
DVD mode again, the unit will resume
playing from the point that just
interrupted.
• During disc playback, press REL button
to release the front panel, the unit will
enter into standby state. Then install
the front panel again, the unit will resume
playing from the point that just
interrupted. If in AV mode or radio mode,
release the panel then install again, the
unit will remain in the previous mode.
• Switch the ignition key to "ACC OFF"
then switch to "ACC ON", the unit will
remain in the previous mode. If in disc
play mode, it will resume playing from
the point that just interrupted.
AV IN OPERATION
When you connect another audio/video
system to the unit through the AV IN
terminals on the back of the unit, press
MODE button on the front panel or
MODE on the remote control to select
AV IN mode.
BASIC PLAY OPERATION
Stopping Playback
- Briefly press (Stop) button to pre-stop the
unit playback, when
panel or (Play) button on the remote
control is pressed, normal playback will
continue.
- Press (Stop) button twice to stop the
playback and go back to DVD LOGO.
Pausing Play/Step Play
Pressing on the remote control for the first
time or presing on the front panel during
playback will stop playback temporarily. To
return to normal playback, press on the
remote control or
If you play a DVD/VCD/SVCD, press on the
remote control again to stop at the next picture
(step function). If you play a CD/MP3/Picture
CD, pressing on the remote control again is
ineffective.
Rapid Forward/Rapid Reverse
Press
/
seconds during playback. Each time the
button is pressed, the speed of rapid
(POWER)
forward/reverse changes according to the disc
as follows.
DVD:
VCD/CD/MP3:
Slow Motion Playback (For DVD Only)
Press
Each time the button is pressed, the speed of
slow forward/reverse changes according to
the disc as follows.
DVD:
In slow motion state, press
control to recover normal playback.
Skipping Track
Press
or T-UP/T-DN buttons on the front panel
during playback.
Press
and press
track.
Note: For some VCD2.0 discs (PBC-playback
control),
may be unavailable.
DVD VIDEO MENU PLAY
When playing a DVD disc in the DVD player:
1) The disc will be played automatically and
stop at menu picture.
2) Use
between the highlight bars in the menu.
3) Press OK button to confirm the selected
16
item.
on the front panel.
&
on the remote control or hold
buttons on the front panel for several
Normal Playback
X2
Normal Playback
during playback.
/
X1/32
X1/16
X1/8
buttons on the remote control
/
to or T-UP to skip to the next track,
or T-DN to skip to the previous
buttons or T-UP/T-DN buttons
/
,
cursor buttons to move
/
/
button on the front
X4
X16
X100
X2
X4
X8
x1/4
x1/2
on the remote
Advertisement
Table of Contents
