Volkswagen Transporter 2020 Manual page 34

Transporter 2020 ➤
Auxiliary heater - Edition 04.2020
♦ Drip tray for workshop hoist - VAS 6208-
Removing
– Remove left underbody cladding ⇒ General body repairs, ex‐
terior; Rep. gr. 66 ; Underbody cladding; Assembly overview
- underbody cladding .
– Disconnect electrical connector -4-.
– Loosen clamps -2-.
CAUTION
The fuel system is pressurised.
Risk of injury caused by fuel spray.
– Wear safety goggles.
– Wear protective gloves.
– To release pressure, wrap a clean cloth around the connec‐
tion, and carefully loosen the connection.
– Place drip tray - VAS 6208- beneath vehicle.
– Pull off fuel hoses -3-.
– Seal fuel hoses -3- with a bung from engine bung set - VAS
6122- .
– Remove metering pump - V54- -1- from bracket.
Installing
Install in reverse order of removal, observing the following:
– Replace O-type clips with screw-type clips.
30
Rep. gr.82 - Supplementary heating