Maintenance; Listening To The Radio - Boss Audio Systems BV9965T User Manual

Before You Start
01

Maintenance

Replacing the Fuse
Make sure the amperage matches the
specified value when replacing the fu-
ses. If the fuse is blown, check the po-
wer connection and replace with a n-
ew one. If the same problem occurs,
it would be subjected to the malfun-
ction. In such cases, please consult
to the nearest service dealer.
Warning
!
Never use the fuse with the rated
amperage more than that supplied to
your unit, otherwise it will damage the
unit.
Replacing the Battery
When the range of the operation of t-
he card remote control becomes short
or no functions while operating. Rep-
lace the lithium battery with a new b-
utton cell (CR2025). Make sure the b-
attery polarity before replace.
Gently pull out the Battery Holder while
pressing the Stopper.
Put the button-type battery with mark(+)
upward into the Battery Holder.
6
Insert the Battery Holder into the Remote
Control.
Precautions on Using Lithium
Battery
Always keep the lithium battery beyond
children s reach. In case
swallowed, see a doctor immediately.
Cleaning the battery with a dry cloth,
to ensure its perfect connected.
Make sure the proper polarity when
loading with the battery.
To prevent short circuit, do not use
metal tweezer to clip the battery.
Warning!
!
Improper handle with the battery may
lead to explosion.
It cannot be charged , disassembled or
thrown into a fire.
Tuner

Listening to the radio

FM1 CH:1 87.50MHz
87.50M 87.50M
90.00M 108.00M
106.00M
98.00M
Band Indicator
1
Shows which band the radio is tuned
to.
Preset Number Indicator
2
Shows what preset has been selected.
Frequency Indicator
3
Shows which frequency the tuner is
tuned.
SEEK+/SEEK-
4
Briefly press to tune by the presettable
range, hold and press to tune automatically.
VOL+/VOL-
5
To increase or decrease the volume.
6 BAND
To select the bands.
7 AMS
Briefly press to scan the current station,
hold and press to tune automatically.
8 MENU
Press this button to set the main menu.
9 SRC
Press this button to select the signal
source.
The 6 stations of the current band.
10
Briefly press to select station, hold and
press to save the current station to one
of the 6 stations.
RDS
11
Press it to enter RDS SETUP.
Band Selector
During radio status, repeatedly press
3 BAND button to select bands in the
fol lowing order:
FM1
FM2 FM3
AM2 AM1
Note:
* Press BAND on the head unit or BAND
in the monitor performs the same function.
Manual/Automatic Tuning
Manual Tuning: ress P ( or ) button
on the remote control continuously to select
a station downward or upward respectively.
Automatic Tuning: ress and P hold ( or
) button for more than 3 seconds, the ra-
dio automatically searches a station down-
ward or upward respectively and plays when
it finds a station.
Note:
Press and button on the head unit or
*
in the monitor performs the same function.
DX/LOC Selector
5
During radio status, press LOC button
to select strong or weak station reception.
LOC appears on the display and only
local station is available. when it disappears
both distance and local stations can be
received.
Note:
The function is only valid on remote control.
*
The function is invalid in AM tuning.
*
Selecting the Stored Station
During radio status, press 27 button to
select the stored station upward, press to
select the stored station downward.
Note:
Press or button on the head unit performs
*
the same function.
35
09