Table of Contents
Advertisement
Quick Links
Product Name: Rebar Chain Assembly
Part #: 01600; 01603; 01605; 01608; 01609; 01610; 01611; 21610
Instruction Manual
Do not throw away these instructions!
Read and understand these instructions before using equipment!
1
1
1
2
2-3
3-4
4
5
5
5
6
7
Advertisement
Table of Contents
Related Manuals for Guardian 01600
Summary of Contents for Guardian 01600
-
Page 1: Table Of Contents
Product Name: Rebar Chain Assembly Part #: 01600; 01603; 01605; 01608; 01609; 01610; 01611; 21610 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment! Introduction Applicable Safety Standards Worker Classifications Product Specific Applications... -
Page 2: Introduction
Introduction Thank you for purchasing a Guardian Fall Protection Rebar Chain Assembly. This manual must be read and understood in its entirety, and used as part of an employee training program as required by OSHA or any applicable state agency. -
Page 3: Product Specific Applications
Rebar hook at center of Rebar Chain Assembly must ONLY be connected to structural rebar. Rebar Chain Assembly snap hooks must ONLY be connected to applicable harness D-rings. Guardian Fall Protection recommends that a back-up fall protection system, suitable for Fall Arrest applications, be used in conjunction with Rebar Chain Assemblies. -
Page 4: Components And Specifications
Web (part #s 01610 and 21610): polyester. Connectors (rebar hooks and snap hooks): galvanized steel. Rebar Hook Snap Hooks Part # Length Description 01600 24” Swivel Rebar Hook & Snap Hooks 01603 24” Swivel Rebar Hook & Clevis Pin Snap Hooks 01605 24”... -
Page 5: Installation And Use
01610 01611 21610 Installation and Use Guardian Fall Protection recommends that a back-up fall protection system, functional in Fall Arrest applications, be used in conjunction WARNING with all Rebar Chain Assemblies. Competent Person must make final determination regarding use of back-up fall protection system. -
Page 6: Maintenance, Cleaning, And Storage
If Rebar Chain Assembly fails inspection in any way, immediately remove it from service, and contact Guardian to inquire about its return or repair. Cleaning after use is important for maintaining the safety and longevity of Rebar Chain Assembly. Remove all dirt, corrosives, and contaminants from Rebar Chain Assembly before and after each use. -
Page 7: Safety Information
Safety Information Failure to understand and comply with safety regulations may result in serious injury or death. Regulations included herein are not all-inclusive, WARNING are for reference only, and are not intended to replace a Competent Person’s judgment or knowledge of federal or state standards. Do not alter equipment. -
Page 8: Labels
Rebar Chain Assembly Date of Manufacture: Part #: Guardian Fall Protection • 1-800-466-6385 • www.guardianfall.com. Prior to use, read and understand all manufacturer’s instructions. Remove from service if exposed to forces of fall arrest. ANSI Z359.1-07 and A10.32-12; OSHA 1910 and 1926 Subpart M Material: galvanized steel.