Power Connections - NVX QBUS8V2 User Manual

Power Connections

Connect the ground terminal to the closest point on the chassis of the vehicle.
Keep this ground wire to less than 39" (100 cm) in length. Use 8 gauge
(or heavier) wire.
Connect the remote terminal to the remote output of head unit using 16 gauge
( or heavier ) wire.
Connect an empty fuse holder within 18" (45 cm) of the car battery, and run 8 gauge
(or heavier) cable from this fuse to the amplifier location. Then connect the fuse
holder to the "BATT+" (+12V) connection on the subwoofer rear panel.
NOTE:
In this connection,the AURO TURN
OFF switch is in the OFF position.
Power Connections
NOTE:
In this connection,the AURO TURN
OFF switch is in the ON position.
5