Related Manuals for Guardian 00516
Summary of Contents for Guardian 00516
-
Page 1: Table Of Contents
Product Name: Drop Through Anchor Part #: 00516; 00517; 00518 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment! Introduction Applicable Safety Standards Worker Classifications Product Specific Applications Limitations Components and Specifications Installation and Use... -
Page 2: Introduction
Introduction Thank you for purchasing a Guardian Fall User Information Protection Drop Through Anchor. This manual must be read and understood in its entirety, and used as part of an employee training Date of First Use: program as required by OSHA or any applicable state agency. -
Page 3: Limitations
Restraint: Drop Through Anchor may be used in Restraint applications. Restraint systems prevent workers from reaching the leading edge of a fall hazard. Always account for fully deployed length of lanyard/SRL. Structure must withstand loads applied in the directions permitted by the system of at least 1,000 lbs. -
Page 4: Components And Specifications
Connector Two connectors directly to to same webbing. D-ring. Incompatible Connector or irregular directly to application, horizontal which may lifeline. increase risk of roll-out. Two or more snap hooks or carabiners connected to each other. Correct Anchorage Positioning: This chart details allowable working zones required to reduce risk of swing falls and improper side loading. -
Page 5: Installation And Use
Part # Description 00516 Drop Through Anchor - 4” Plate 00517 Drop Through Anchor - 6” Plate Drop Through Anchor - 12” Plate 00518 Installation and Use Prior to installation, plan your system: 1. Ensure all PFAS equipment is selected and deemed compatible with Drop Through Anchor by a Competent Person. -
Page 6: Maintenance, Cleaning, And Storage
Maintenance, Cleaning, and Storage If Drop Through Anchor fails inspection in any way, immediately remove it from service, and contact Guardian to inquire about its return or repair. Cleaning after use is important for maintaining the safety and longevity of Drop Through Anchor. Remove all dirt, corrosives, and contaminants from Drop Through Anchor before and after each use. -
Page 7: Safety Information
Safety Information Failure to understand and comply with safety regulations may result in serious injury or death. Regulations included herein are not all-inclusive, WARNING are for reference only, and are not intended to replace a Competent Person’s judgment or knowledge of federal or state standards. Do not alter equipment. -
Page 8: Labels
Labels 85155 (Rev. E)