Unit Installation - Boss Audio Systems BV6450 User Manual

3. During JPEG playback, press one of the >/</^/v buttons to change the angle of
viewing picture that is displaying as follows:
>: 90 deg cw; <: 90deg ccw; ^:UP<-->DOWN; v: LEFT<-->RIGHT
During JPEG playback, press the PROG button to change the mode of refresh picture.
During JPEG playback, press the STOP button to stop playing and return to the root
menu.
* During JPEG playback, the following buttons are not available: SLOW-FWD, MENU,
SUBTITLE, TITLE, ANGLE, STEP, AUDIO, RDM, INT and A-B.
* In JPEG mode,the other operations are same as ones in MP3/WMA mode.
5 .16 MP4 Operation
1. The root menu is displayed on TV when beginning to switch on DISC mode, then it will
automatically play the first file.
During playback, press the STOP button to stop playing and return to the root menu.
2. When displaying the root menu, press the direction buttons to select your desired
FOLDER or file, then press the OK or PLAY button to open the FOLDER, or play the
selected file.
When displaying the root menu, you can also use the number buttons to select the
serial number of the file and play the file.
* The ANGLE, PROG, RDM, INT , MENU, SUBTITLE and TITLE/PBC buttons are not
valid.
* The other functions are same as ones in DVD disc; but the RPT function is same as
one in MP3/WMA.
5 .17 ESP and ID3 Function
There is ESP function for all formats of discs.
In MP3/WMA mode, during playback, the information of the folder, file,
album will be scrolling on the LCD display. As long as the current playing
contains relevant ID3 tag information in version 1.0/2.0 format, the 3 items underlined
above will be scrolling on the LCD display; otherwise, they will not.
5 .18 USB and MMC/SD Reader Operation
Power on the DVD player, then insert the USB storage or MMC/SD Card(firstly flip down
the front panel), and then the monitor will display the root menu of the USB storage or
MMC/SD Card.
All the operations are same as ones of the corresponding format.
When you want to pull out the Card, firstly push it, and then pull it out.
5 .19 The DVD System Menu Setup Operation
1. Press the SETUP button on the remote controller to access the DVD System Menu on
the monitor.
2. There are 6 setup pages in all for the System Menu. Press the > or < button to select
an desired setup page.
3. Press the ^ or v button to select an setup item in the selected setup page.
4. Press the > button to enter the setup item. Then press the v or ^ button to select a
desired mode of the setup item, finally press the OK button to confirm it.
* Press the < button to return to the upper level.
* Press the SETUP button again to exit the System Menu.
PDF created with FinePrint pdfFactory trial version
song, artist and
MP3 music
http://www.pdffactory.com

1.9 UNIT INSTALLATION

INSTALLATION INSTRUCTIONS
THE UNIT INSTALLATION IS ANTI-THEFT ONE. THE UNIT
CHASSIS WEARS A SLIDING METAL HOUSING. FIRSTLY
CONNECT THE POWER LINES, SPEAKER LINES AND
AUTO ANTENNA ACCORDING TO MANUAL REQ UIREMENT,
THEN INSTALL THE SLIDING METAL HOUSING IN A CAR
ACCORDING TO THE DIAGRAM.
TO BO OST U P THE CAPAB ILITY O F
ANTI-JAMMING, PLEASE F IX THE
META L STRA P ON T HE ME TAL
CONN ECTED TO TH E CHA SSIS O F
METAL STRAP
THE C AR.
DASH BOA RD
SLID ING M ETAL H OUSIN G
TO DRAW TH E CHASSIS OUT OF T HE
SLIDING METAL HOUSING, INSERT
THE LEFT AN D RIGHT KEY PLATE S
INTO THE TWO SIDE S OF CHASSIS.
NOTE
REMOVE TH E DEC K TRANSPOR T
SCREWS BE FORE INSTA LLING IT.
REMO VE THE SLIDING ME TAL HO USING
S ELECT THE P ROPER TABS
O F THE SLIDIN G METAL
H OUSIN G TO F IX THE
S LIDING META L HOU SING.
UNIT CHAS SIS
PLAS TIC TR IM OUT
F RONT PANEL
EJECT BU TTON
RE SET BUTTON