Related Manuals for Tundra TUNMAGL0100
Summary of Contents for Tundra TUNMAGL0100
- Page 1 USER MANUAL TUNMAGL0100 • TUNMAGL0300 • TUNMAGL0600 TUNMAGL1000 • TUNMAGL2000 • TUNMAGL3000 • TUNMAGL5000 v1.3 MAGNETIC LIFTER 100kg-5000kg SERIES...
- Page 2 The information in this document is to the best of our knowledge true and accurate, but all recommendations or suggestions are made without guarantee. Since the conditions of use are beyond their control, Tundra Industrial ® disclaim any liability for loss or damage suffered from the use of this data or suggestions.
-
Page 3: Safety Guidelines
• Always inspect equipment for damage before use. • Ensure any damaged parts are replaced before use - use only Tundra Industrial recommended parts - contact your dealer for advice. • Do not use this equipment if damage or weakness is detected during inspection. -
Page 4: Lifting Safety
USER MANUAL TUNMAGL0100 • TUNMAGL0300 • TUNMAGL0600 TUNMAGL1000 • TUNMAGL2000 • TUNMAGL3000 • TUNMAGL5000 v1.3 Lifting Safety • Do not use this device in the rain or a wet environment. If using outdoors, make sure the surface is clean and dry. - Page 5 USER MANUAL TUNMAGL0100 • TUNMAGL0300 • TUNMAGL0600 TUNMAGL1000 • TUNMAGL2000 • TUNMAGL3000 • TUNMAGL5000 v1.3 3.2 Lifting Guide The actual lifting capacity of the magnet is affected by the following factors: • Material Thickness: The thickness of the steel plate (see steel thickness graph below: Fig.2 below and detailled in Fig.3 page 6).
- Page 6 USER MANUAL TUNMAGL0100 • TUNMAGL0300 • TUNMAGL0600 TUNMAGL1000 • TUNMAGL2000 • TUNMAGL3000 • TUNMAGL5000 v1.3 Fig.3: Lifting capacity adjustments based on thickness of steel Capacity pf Magnetic Lifter: Fig.4: Lifting capacity adjustments based on the air gap % Of Lifting Capacity...
-
Page 7: Maintenance
USER MANUAL TUNMAGL0100 • TUNMAGL0300 • TUNMAGL0600 TUNMAGL1000 • TUNMAGL2000 • TUNMAGL3000 • TUNMAGL5000 v1.3 4. OPERATION GUIDE Ensure that you have read all the safety instructions and checked the equipment for damage before use. Check that the working environment is suitable for operating the equipment. -
Page 8: Limited Warranty Statement
Upon inspection of the equipment, if no defect can be found or the equipment is not covered under the terms of the Tundra Industrial warranty, the customer will be liable for any labour and return transportation costs incurred. - Page 9 Where repair is not covered by the warranty a quotation for repair, labour costs and return delivery will be sent to the customer (normally within 7 working days). Note: If the repair quotation is not accepted Tundra Industrial will invoice 1 hour labour time at £30 per hour plus return carriage costs (plus VAT).
-
Page 10: Notified Body
TUNMAGL0100 • TUNMAGL0300 • TUNMAGL0600 TUNMAGL1000 • TUNMAGL2000 • TUNMAGL3000 • TUNMAGL5000 v1.3 EC DECLARATION OF CONFORMITY We, Tundra Industrial, as the authorised European Community representative of the manufacturer, declare that the following equipment conforms to the requirements of the following Directives: Directive: Description:... - Page 11 USER MANUAL TUNMAGL0100 • TUNMAGL0300 • TUNMAGL0600 TUNMAGL1000 • TUNMAGL2000 • TUNMAGL3000 • TUNMAGL5000 v1.3...
- Page 12 USER MANUAL TUNMAGL0100 • TUNMAGL0300 • TUNMAGL0600 TUNMAGL1000 • TUNMAGL2000 • TUNMAGL3000 • TUNMAGL5000 v1.3...
Need help?
Do you have a question about the TUNMAGL0100 and is the answer not in the manual?
Questions and answers