Related Manuals for Tundra TUNLB0.75-3
Summary of Contents for Tundra TUNLB0.75-3
- Page 1 USER MANUAL TUNLB0.75-3 • TUNLB1.50-3 TUNLB3.00-3 • TUNLB6.00-3 LEVER BLOCK 0.75 TONNE - 6 TONNE SERIES...
- Page 2 The information in this document is to the best of our knowledge true and accurate, but all recommendations or suggestions are made without guarantee. Since the conditions of use are beyond their control, Tundra Industrial ® disclaim any liability for loss or damage suffered from the use of this data or suggestions.
-
Page 3: Safety Guidelines
• Always inspect equipment for damage before use • Ensure any damaged parts are replaced before use - use only Tundra Industrial recommended parts - contact your dealer for advice • Do not use this equipment if damage or weakness is detected during inspection •... -
Page 4: Specifications
USER MANUAL TUNLB0.75-3 • TUNLB1.50-3 TUNLB3.00-3 • TUNLB6.0 2. DESCRIPTION This equipment has been designed for vertically lifting and lowering loads by hand, under normal atmospheric conditions in a safe working environment. Features: • Heavy duty Lever block with 3.0M standard lifting capacity. - Page 5 USER MANUAL TUNLB0.75-3 • TUNLB1.50-3 TUNLB3.00-3 • TUNLB6.0 Capacity (T) Standard Lift (M) Test Load (kN) Effort required to lift max load (N kg) Load Chain Diameter x Chain Fall (mm) Lifting Height / full handle rotation (kg) Extra Weight / meter (kg)
-
Page 6: Maintenance
This equipment must be kept clean and dry and must be maintained in accordance with these instructions. The owner and/or operator must be aware that repair of this equipment will require specialised knowledge and facilities. Unauthorised parts may be dangerous and will invalidate the warranty. Contact your Tundra Industrial dealer for repair advice. Lubrication: •... - Page 7 USER MANUAL TUNLB0.75-3 • TUNLB1.50-3 TUNLB3.00-3 • TUNLB6.0 5.2 PERIODIC EXAMINATION SCHEDULE: Recommended periodic examination interval guidelines: • Normal Use: Examine every six months • Heavy Use: Every 4 months • Excessive / Frequent Use: Every month...
- Page 8 USER MANUAL TUNLB0.75-3 • TUNLB1.50-3 TUNLB3.00-3 • TUNLB6.0 5.2 PERIODIC EXAMINATION SCHEDULE (continued):...
- Page 9 USER MANUAL TUNLB0.75-3 • TUNLB1.50-3 TUNLB3.00-3 • TUNLB6.0 5.2 PERIODIC EXAMINATION SCHEDULE (continued):...
-
Page 10: Parts List & Exploded Diagram
USER MANUAL TUNLB0.75-3 • TUNLB1.50-3 TUNLB3.00-3 • TUNLB6.0 6. PARTS LIST & EXPLODED DIAGRAM... - Page 11 USER MANUAL TUNLB0.75-3 • TUNLB1.50-3 TUNLB3.00-3 • TUNLB6.0 Part # Description Part # Description Part # Description Gear slider plate assembly Brake seat Chain ring Brake side plate assembly Friction seat Hex nut Gear case assembly Ratchet disc Reversing pawl...
-
Page 12: Troubleshooting
USER MANUAL TUNLB0.75-3 • TUNLB1.50-3 TUNLB3.00-3 • TUNLB6.0 7. TROUBLESHOOTING... -
Page 13: Limited Warranty Statement
Upon inspection of the equipment, if no defect can be found or the equipment is not covered under the terms of the Tundra Industrial warranty, the customer will be liable for any labour and return transportation costs incurred. - Page 14 Where repair is not covered by the warranty a quotation for repair, labour costs and return delivery will be sent to the customer (normally within 7 working days). Note: If the repair quotation is not accepted Tundra Industrial will invoice 1 hour labour time at £30 per hour plus return carriage costs (plus VAT).
-
Page 15: Ec Declaration Of Conformity
TUNLB0.75-3 • TUNLB1.50-3 TUNLB3.00-3 • TUNLB6.0 EC DECLARATION OF CONFORMITY We, Tundra Industrial, as the authorised European Community representative of the manufacturer, declare that the following equipment conforms to the requirements of the following Directives: EN 13157:2004+A1:2009 (as amended) Cranes. Safety. Hand powered lifting equipment. - Page 16 USER MANUAL TUNLB0.75-3 • TUNLB1.50-3 TUNLB3.00-3 • TUNLB6.0...
Need help?
Do you have a question about the TUNLB0.75-3 and is the answer not in the manual?
Questions and answers