Advertisement
New 2" BEAD BAZOOKA®
For best performance, please add silicone oil or air tool oil to the RAR Valve every 1~2 months
by performing the following steps:
1.Remove the barrel.
2.Push the piston down.
3.Apply silicone oil or air tool oil to the upper part of the piston.
4.Apply the oil to the edge of the piston. ( Black O-Ring )
5.Press the piston repeatedly until the oil flow into the interior of valve.
WARNING:
●
COMPRESSED AIR IS DANGEROUS - ALWAYS WEAR EYE AND EAR PROTECTION. ALWAYS FOLLOW THE INSTRUCTIONS
GIVEN ABOVE.
●
THE BEAD BAZOOKA® IS A TOOL FOR THE TIRE INDUSTRY AND SHOULD NEVER BE USED OTHERWISE
The product should operate by professionals.
●
Never allow the nozzle to point in the direction of a person
●
Please vent the rest of air after use.
●
Do not try to disassemble or modify the product.
●
Please Keep away from children
●
Repair and Troubleshooting :
Read the instructions and check
●
If the Bead Booster can not be used, please contact the store for repair.
●
GAITHER
Bead Bazooka
BEAD BAZOOKA®
®
Care and Maintenance :
˙ Indoor use only
˙ Avoid this product under the sun or heat exposure
˙ Often maintenance can increase the time usage of the
product
˙ Use often, please maintenance weekly
˙ In order to avoid parts damage, do not use this product
in the rain
˙ Recommend using silicone oil for maintaining piston,
in order to avoid damage to the parts.
to see whether there are missing parts of damaged parts.
Gaither's BB3L2 / BB6L2 / BB10L2
Care
.
Page 7
Advertisement
