3. EXPLODED VIEW AND PARTS LIST Cabinet Assembly Mechanical Parts (Top Side) Mechanical Parts (Bottom Side) 4. ELECTRICAL PARTS LIST 5. BLOCK DIAGRAM 6. SCHEMANTIC DIAGRAM S.M.P.S Power Drive System Control / Servo Display Audio / Video Input – Output Model No.: VCR-S207 Version: 1.0...
Be sure to wind the unwound tape with the unit in the horizontal position.) Rotate Gear Worm clockwise using a screwdriver until the mecha is in the eject state. Remove the tape. (Refer to Fig. 2) Model No.: VCR-S207 Version: 1.0...
10. Immediately before handling any semiconductor components or assemblies, drain the electrostatic charge from your body by touching a known earth ground. Alternatively, wear a discharging Wrist-strap device. (Be sure to remove it prior to applying power--this is an electric shock precaution.) Model No.: VCR-S207 Version: 1.0...
Page 7
16 Always connect a test instrument’s ground lead to the instrument chassis ground before connecting the positive lead; always remove the instrument’s ground lead last. Model No.: VCR-S207 Version: 1.0...
Page 8
Use replacement components that have the same ratings, especially for flame resistance and dielectric strength specifications. A replacement part that does not have the same safety characteristics as the original might create shock, fire or other hazards. Model No.: VCR-S207 Version: 1.0...
Press the “TEST” button on F-AV PCB/Main PCB/Function PCB to set the adjustment mode. b. If the corresponding adjustment button is pressed, the adjustment is performed automatically. c. When the adjustment is completed, be sure to turn the power off. Model No.: VCR-S207 Version: 1.0...
-12 - 2.2 Mechanical Adjustment Note : Refer to the Mechanical Manual “TS-10A (AC82-00023A)” for the adjustment and confirmation of ass’y full deck. 2.2.1 The number and position of test point Model No.: VCR-S207 Version: 1.0...
5. Press the “MENU” button of remote control again to store the option number. (“PLEASE WAIT” is displayed for a second as shown Fig. 2-5 and this setting is completed.) 6. Turn the Power off. Model No.: VCR-S207 Version: 1.0...
S.N.A : Service Not Available VCP-007LR4(G)/007LR4(S) VCR-S207(G)/S207(S) UT01 (VCP ONLY) STANDBY ON EJECT SLOW SHUTTLE V-LOCK STANDBY/ON DISPLAY CLR/RST F.ADV INDEX A.TRK INPUT CNT.RESET SPEED REPEAT IIP/S AUDIO DISPLAY PROG MENU MENU SPEED TV/VCR TIMER Model No.: VCR-S207 Version: 1.0...
Need help?
Do you have a question about the VCR-S207 and is the answer not in the manual?
Questions and answers