Usb/Sd Card Control - Boss Audio Systems 639UA User Manual

USB/SD Card (M P3 Playback) Control
3
7 1
SD
9
1.) PLAY
Files will begin to play automatically. Press
Play to resume playback from pause /
stop.
2.) STOP
Press to stop playback. Press PLAY
to begin playback on the first track
(NOT the track on last play)
3.) PAUSE
Press to pause playback. Press PLAY
to resume playback from last play
4.) SCAN (Intro Scan)
To audition the first 10 seconds each track,
press this button. Press again to cancel
and begin to play the auditioned track.
5.) REPEAT (Repeat Play Mode)
Press this button to repeat all the playback
automatically. PRT ONE/DIR/ALL
be displayed. Press again to cancel.
2 4 5 6
RESET
6.) RANDOM (Random Play Mode)
Press this button to play all MP3files in
random order. RDM ON/OFF
be displayed. Press again to cancel.
7.) I<< and >>I(Skip back/skip forward,
fast back/fast forward)
Press those buttons to skip back or
ahead one track. Press and hold for
fast back or fast forward.
8.) USB PORT
Insert USB drive in this port for
playback
9.) SD CARD SLOT
Inser SD card in this slot for playback
will
- 10 -
using remote control....
1.) POWER Use to turn receiver on/off
2.) TUNE/SEEK Press this button briefly
to step up or down the radio dail in
8
single step increments. Press and
hold for half second to enter SEEK
mode. In this mode the tuner will
stop at the next strong station
available.
3.) EQ (Preset Equalizer Curves) Press
repeatedly to cycle through four preset
curves FLAT, POPS,ROCK or CLASSIC.
4.) MUTE Press to silence the audio.
Press again to return to previous volume
level.
5.) VOLUME - / VOLUME + Use to increase
or decrease volume level
6.) LOC (Local/Distant Select)In some
areas, the reception of FM stations may
be weak. Change the reception mode to
LOC by pressing the button may skip the
poor signal station. Press again to return
to DISTANT mode.
7.) SELECT Press this button to cycle
will
through the following adjustable settings:
VOLUME>BASS>TREBLE>BALANCE
>FADER>EQUALIZER
8.) MO/ST In some areas, the reception of
FM stations may be weak. Change the
reception mode to MONO by pressing
the button may improve the reception.
Press again to return to STEREO
9.) RADIO PRESET 1-6 After you preset the
stations via front panel, you can use this
buttons 1-6 to select the preset stations.
10.) AMS (Auto Memories Scan) This is the
easiest way to set up the preset station
in each radio band. If you press AMS,
the radio will scan up all the strongest
station and preset automatically.
Please note, all the previous preset will
be lost.
11.) LOUDNESS Press to increase bass output.
Press again to turn off Loudness function.
3
1
2
5
7
9
11
12 14
12.)BAND Press briefly, repeatly to
cycle through five radio bands:
FM1>FM2>FM3>AM1>AM2
13.) SOURCE (Input select, same
as MODE on head unit)
Press the button repeatly to
cycle through the audio input
sources:
RADIO>CD>USB>SD CARD
> AUX IN
14.) CLOCK SETTING
See Setting Clock for more
detail
- 7 -
4
6
8
10
13