General/Radio Control - Boss Audio Systems 639UA User Manual

Mp3-compatible in-dash cd receiver with usb and sd memory card ports and front panel aux input
Hide thumbs Also See for 639UA:
Table of Contents

Advertisement

General And Radio Control
2
1
6,10
3
7
1.) VOLUME UP/DOWN KNOB (TURN)
AUDIO MODE SELECTOR (PRESS)
In normal mode, use this knob to
increase / decrease the volume level.
To access various sound parameters
push the button (like a button) to cycle
through the following adjustable
settings:
VOLUME>BASS>TREBLE>BALANCE
>FADER>EQUALIZER
Use volume knob to increase / decrease
the setting of Volume, Bass, Treble,
Balance and Fader
For Equalizer, rotate the volume knob
cycle through and select response curve
you wish:
FLAT,POPS, ROCK or CLASSIC.
To save setting, press the knob and move
on next parameter. You can exit the
system by pressing until you return to VOL,
or simply do nothing and the unit will return
to normal mode automatically.
2.) POWER
Press Power to turn on the unit.
Press and hold Power to turn off the unit.
3.) MODE
Press the button repeatly to cycle through
the audio input sources:
RADIO>CD>USB>SD CARD>AUX IN
4.) AUX IN
This jack is a convienent way to play music
from MP3 player such as iPod throguh your
car stereo.
Simply connect headphone output from MP3
8
4
5
9
player to this input jack. Press MODE to
select AUX as input source and begin to
play music on the MP3 player.
5.) RADIO PRESET 1-6
These button are used to store radio
stations. To set a preset, tune the desire
radio station, then press and hold the
preset you wish to assign that station
more then one second and release. To
replace it with different station, repeat
the precess and the new setting will
override the previous one.
6.) BAND
Press briefly, repeatedly to cycle through
five radio bands:
FM1>FM2>FM3>AM1>AM2
7.) TUNE/SEEK UP/DOWN BUTTON
Press this button briefly to step up or
down the radio dail in single step
increments. Press and hold for half
second to enter SEEK mode. In this
mode the tuner will stop at the next
strong station avaliable.
8.) REL
Press to drop down the detachable
front panel to insert CD or SD Card.
See Detachable Control Panel for
more detail.
9.) AMS (Auto Memories Scan)
This is the easiest way to set up the
preset station in each radio band.
If you press AMS, the radio will scan
up all the strongest station and preset
automatically
10.)LOUDNESS
Pressand hold to increase bass output.
Press and hold again to turn off
Loudness function.
- 6 -
using remote control....
1.) I<< and >>I (Skip back/skip forward, fast
back/fast forward)
Press those buttons to skip back or ahead
one track. Press and hold for fast back or
fast forward.
2.) RDM (Random Play Mode) Press
this button to play all MP3 files in
random order.
RDM ON/OFF will be
displayed. Press again to cancel.
3.) STOP
Press to stop playback. Press PLAY
PAUSE to begin playback on the first
track (NOT the track on last play)
4.) PLAY/PAUSE Files will begin to play
automatically. Press Play to pause
the MP3 playback and
PAUSE
will
be displayed. Press again to resume
playback.
5.) RPT (Repeat Play Mode) Press this
button to repeat all the playback
automatically.
PRT ONE/DIR/ALL
will be displayed. Press again to cancel.
6.) NUMERIC PAD Press the number key
during playback to select particular track.
For example, #45, press 4, 5, Enter and
the 45th track will begin to play.
7.) SOURCE (Input select, same as MODE
on head unit) Press the button repeatedly
to cycle through the 5 audio input sources
in order to select either USB or SD modes.
Changing the battery in remote control
The remote is held one small drawer
on one edge of the remote. To open this
drawer, press and hold the small button
on the edge of this small drawer (as show)
and slide the drawer out.
Insert the new battery and push the drawer
back fully into the remote.
1
6
Battery
Release button
- 11 -
2
3
4
5
7

Advertisement

Table of Contents
loading

Table of Contents