Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for TAIFUN BT
Summary of Contents for TAIFUN BT
- Page 1 ® User Manual english...
-
Page 2: General Information
Taifun® BT rebuildable tank atomizer. The manufacturer is not liable for damage caused by improper use. General information With the Taifun® BT you have purchased a high quality rebuildable tank atomizer, which has been designed exclusively for use with e-liquid. - Page 3 The mesh develops very high temperatures (glowing) during use. Do not use the device without liquid. Do not use the Taifun® BT in areas, which could be enriched with flammable gases, vapors or dusts. Risk of explosion! Do not connect the device to additional or external voltages. Only connect the Taifun®...
- Page 4 Taifun® BT – User Manual Warnings This device is not intended for use by persons under the age of 18 years, pregnant or breast-feeding women, persons with cardiovascular disease, persons with respiratory illness, persons with allergies to the ingredients of the used liquids, and persons with limited comprehension.
- Page 5 For the operation of the atomizer we recommend the use of the mesh included in the scope of delivery with a mesh width of 300. We recommend using the Taifun® BT in the resistance range between 0.25 and 0.5 Ohm. The resistance depends on the surface and the mesh width of the used mesh.
- Page 6 Taifun® BT – User Manual Maintenance, cleaning and care The Taifun® BT is made of high-quality materials and has been cleaned before delivery. Intensive cleaning is not necessary. Visible moisture residues result from the cleaning which has already taken place, or the pretreatment of the O-rings with glycerol.
- Page 7 Taifun® BT – User Manual Scope of delivery Taifun® BT 1 x Rebuildable atomizer Taifun® BT 1 x Info card for authenticity verification 1 x Drip Tip BT 1 x Sealing rings (spare parts) 3 x Stainless steel rope 7x7, 3mm Ø – length approx. 28 mm...
- Page 8 Taifun® BT – User Manual Insert the stainless steel wire If the stainless steel wires are not installed, these must be inserted into the tank before the mesh is installed. For this purpose, they are pushed gently through the wicking holes of the evaporator cover with slight rotational movements.
- Page 9 Taifun® BT – User Manual Installing the mesh On the base are holding bolts, which are used to attach the mesh (in the plus and minus pole). The mesh must not be damaged, it must be attached in an arc and must not touch the surrounding metal parts (short-circuit danger).
-
Page 10: Regulating The Airflow
Taifun® BT – User Manual Installing the cotton When installing the cotton, it is necessary to press the cotton with pressure. The cotton should not lie loosely on the wicks or between the mesh. To do this, you can press the cotton with your finger or, if necessary, with a small screwdriver. -
Page 11: Filling The Tank
Filling the tank To fill the tank, first remove the top cap from the top. The tank of the Taifun® BT is filled via the holes within the holding bolts. Due to the conical opening, various liquid bottles can be placed directly. Press on the liquid bottle to get the liquid into the tank. -
Page 12: Emptying The Tank
Taifun® BT – User Manual Emptying the tank The tank can also be emptied easily via the filling opening (for example, when changing the liquid). For this purpose, an empty liquid bottle is placed on the filling opening. Now press the bottle together. - Page 13 Taifun® BT – User Manual Parts Taifun® BT Tank base Lower base plate Glass tank Tank cover Upper base plate Top cap Holding bolt Drip tip Positive pole screw 3x O-Ring NBR 50 / 17 x 1,5 mm 1x O-Ring NBR 50 / 17 x 1,0 mm...
- Page 14 Taifun® BT – User Manual Assembly Taifun® BT The o-ring [12] is attached to the The o-ring must be evenly sit in the The second o-ring [12] is attached to Place the o-ring [12] in the recess tank base [1].
- Page 15 Taifun® BT – User Manual Assembly Taifun® BT The positive pole screw [9] is pushed The positive pole screw [9] is now The o-ring [10] is now attached to Place the o-ring [10] in the recess through the tank base [1]. Hold the tightened.
- Page 16 Taifun® BT – User Manual Replacing the tank positive pole screw tank base holding bolt tank cover top cap To dismantle the tank, the pole screw must be removed first This loosens the upper base plate. The tank can now be...
- Page 17 Taifun® BT – User Manual Edelstahlsiebgewebe (Mesh) anbringen In the first step the tank cover has to In order to be able to install the There are two slots in each pole. The mesh should have a maximum be unscrewed. The three stainless mesh, the holding bolts must first be These are used to insert the mesh.
- Page 18 Taifun® BT – User Manual Prepare a piece of cotton (approx. Roll the cotton to a plug. Carefully push the plug from above Stuff the cotton into the mesh arch. 1x5 cm). into the mesh arch. The mesh must always be in contact The mesh must not be moved or with the cotton.
- Page 19 Taifun® BT – User Manual SMOKERSTORE ELECTRONIC VAPING PRODUCTS SmokerStore GmbH www.smokerstore.de...
Need help?
Do you have a question about the BT and is the answer not in the manual?
Questions and answers