Advertisement
Quick Links
Advertisement
Summary of Contents for C Prox Quntek PN10
- Page 1 C Prox Ltd (inc Quantek) Unit 11 Callywhite Business Park, Callywhite Lane, Dronfield, S18 2XP +44(0)1246 417113 sales@cproxltd.com www.quantek.co.uk Access Control Proximity Reader PN10 User Manual Please read the manual carefully before installing this unit...
-
Page 2: Specification
1. Packing list Name Quantity Remarks PN10 Proximity reader Infrared remote Admin add card Admin delete card User manual Self-tapping screws Φ3.5mm×27mm, used for fixing Screw driver Star Please ensure that all the above contents are correct. If any are missing please notify us immediately 2. -
Page 3: Installation
5. Installation • Remove back plate from the reader using security driver supplied, and use it (or the template) to mark the two fixing holes and one cable hole. • Drill the cable and fixing holes. • Secure back plate to the wall using fixing screws provided. •... -
Page 4: Factory Reset
Reader mode 7. Factory reset Turn off power to the unit. Press and hold the exit button whilst powering the unit up. After hearing 2 beeps release the exit button. The admin code has now been reset to 999999, and factory default settings are restored. - Page 5 9. Programming 9.1 Add and delete users by admin cards It is highly advised to make a note of the User ID number and card number to allow for individual deletion of cards in the future, see the last page. Add users Read admin add card Read 1 user card Read 2...
-
Page 6: Admin Settings
9.3 Admin settings To enter programming mode * Admin code # 999999 is default admin code To exit programming mode Must be pressed after completing programming Note that to undertake the following programming the administrator must be logged in To change the admin code 0 New code # New code # The admin code is any 6 digits To set admin add card... - Page 7 10. User operation To open the door: Read valid card To turn off alarm: Read valid card or Enter admin code# 11. Issue record It is highly advised to make a note of the User ID number and card number to allow for individual deletion in the future.