Related Manuals for Grace SMP-03-12171
Summary of Contents for Grace SMP-03-12171
- Page 1 4-Piece Accessory Hopping Foot Installation for the 21” Quilting Machine Copyright Jan 22, 2021 Grace Company (Reproduction Prohibited) Version 1.2...
-
Page 2: Included Parts
Included Parts Micro-Stippling Standard Ruler Foot Open-Toe Foot Foot Hopping Foot SMP-04-11709 SMP-04-11707 SMP-O4-11708 SMP-04-10057 Hopping Foot SHCS Presser Foot Height Gauge M3 x 8 mm (x4) Collar SM21 SMP-03-12171 (2 pre-installed) SMP-09-14524 HDW-03-10966... -
Page 3: Important: Read First
IMPORTANT: READ FIRST The standard hopping foot installed on your machine may not match the standard hopping foot found in this kit. If this is the hopping foot on your machine, go to “Upgrading the Hopping Foot” on page 4. If this is the hopping foot on your machine, go to “Switching the Accessory Feet”... - Page 4 Upgrading the Hopping Foot Required Parts & Tools: Hopping Hopping Hopping Foot Foot Hopping Screw Foot Collar Collar Foot Screw Use a 3 mm Allen wrench to remove the Hopping Foot Standard screw attaching the hopping foot to the Height Gauge Hopping Foot hopping foot collar on your machine.
- Page 5 Hopping Foot Collar Standard Hopping Foot Slide the hopping foot collar that came Place the upgraded standard hopping foot onto the hopping foot collar bar. with this kit onto the press bar. Hold in place with the hopping foot collar screw. Attach with a hopping foot screw loosely enough that the hopping foot can slide up and down.
- Page 6 Switching the Accessory Feet Required Parts & Tools: Allen Wrench 3 mm (not included) Hopping Foot Open-toe Foot Stippling Foot Ruler Foot Height Gauge Check the position of your hopping foot. The open toe and stippling accessory feet can only be used if the hopping foot is set directly behind the needle. See your machine manual for instructions on changing the hopping foot orientation.
- Page 7 Hopping Foot Accessory Screw Hopping Foot Remove the screw attaching the Loosely attach one of the accessory hopping foot to your machine using a hopping feet onto the collar bar with a 3 mm Allen wrench. hopping foot screw. Hopping Foot Height Tool Note: Reset the hopping foot height every time the hopping foot is swapped...
- Page 8 The Grace Company 2225 South 3200 West Salt Lake City, UT 84119 Phone: 1-800-264-0644 Fax: 801-908-8888 www.graceframe.com...