QDI SA3000 AGP User Manual page 8

If Windows 95(OSR2) has been installed before the installation of
the SA3000 AGP card, the first time Windows 95 runs with the
SA3000, the Update Device Driver Wizard
window appears, click next (Do not click Cancel , or your system
will hang!). Then click finish to install the standard VGA driver,
direct the installation path to your \windows\system directory if
Windows 95 CD is requested. Follow the prompt, do not restart
Windows 95 then proceed to step 2. If using Windows 98/NT, this
incident will not occur.
2. Installing the SA3000 driver
After inserting the auto-run SA3000 driver CD into the CD
ROM drive, a dialog box pops up as shown on the following
page. You can also run AutoRun.exe from the CD directly if
auto-run is not supported by your system.
Drivers Auto-Installation 6
SA3000en.pm6 8 99-1-25, 10:03