Hardware Installation - QDI SA3000 AGP User Manual

5.
Carefully insert the graphic card into the AGP slot by
holding the card at the top and gently pushing both ends
into the slot at the same time. Do not force the card into
the slot! If the card does not fit easily, pull it back, and
again.
6.
Secure the card with the screw removed in the above step.
7.
Replace and secure the system cover.
8.
Connect a VGA compatible or multi-frequency monitor
with the 15 pin video connector at the back of the QDI SA3000
card.
9.
Reconnect the computer to the power supply.
SA3000en.pm6

Hardware Installation

6
try
4
99-1-25, 10:03