Step 3 - Attach Stand To Wall - Haier HLP0R02AXW Installation Instructions Manual

STEP 3 - ATTACH STAND TO WALL

1. Remove the paper liner from the double-sided foam tape on the back of the
support brace.
d
Stand must be securely assembled, fastened to wall and dryer attached
to stand, per installation instructions.
Failure to do so could result in death, electric shock, personal injury or
property damage.
2. Locate a stud in the wall where you want to place the dryer.
3. Carefully walk the stand and dryer assembly to the location where one of the
holes in the support brace will align with the wall stud.
4. Firmly apply pressure to the length of the support brace to adhere the double-
sided foam tape to the wall.
c
c
WARNING
Tip and Utility Rupture Hazard
Support Brace
Double-Sided
Foam Tape
Support Brace
9