Lite Source LS-20738 Assembly And Installation Instructions

ITEM NO.: LS-20738
ASSEMBLY AND INSTALLATION INSTRUCTIONS
WARNING: TO AVOID THE RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER
BEFORE INSTALLING OR SERVICING THIS PORTABLE.
Installation Steps：
1. Attach the metal rings (1) to the sockets.
2. Use 12V 10Watt (Maximum) halogen G4 bulb
(bulbs included). Install bulbs (2) into sockets.
3. Attach glass diffusers (3) to sockets by sliding
glass over the sockets .
4. Plug in to wall outlet and turn on with switch.
**Use 12V 10W x 5PCS(MAXIMUM) G4 BULB.
(BULBS INCLUDED) "ONE EXTRA BULB"
** IMPORTANT SAFETY INSTRUCTIONS
This portable lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of
electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord
unless plug can be fully inserted. Do not alter the plug.
**
THIS UNIT COMES WITH A PROTECTIVE GLASS SHIELD WHICH PROVIDES ULTRAVIOLET
RADIATION PROTECTION. USER IS CAUTIONED TO REPLACE THESE PROTECTIVE SHIELDS
AFTER EITHER INSTALLATION OR REPLACEMENT OF TUNGSTEN HALOGEN BULB.
※ PLEASE INFORM YOUR DEALER IMMEDIATELY IN CASE OF ANY PARTS SHORTAGE.
※ SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.