Coleman CHALET 9 CV Setup Instructions page 2

Dismantling Your Tent
The dismantle process of the tent is the reverse of the preceding instructions and special care
should be taken in removing the pegs (NEVER pull on the material to remove the pegs, use a
peg remover) and make sure that the pegs and tent materials are dry and clean before
packing away.
A wet tent will mildew quickly and will void your warranty.
Keeping your tent clean and dry and following theses simple instructions will ensure you enjoy
many pleasant camping experiences.
To prolong the life of your tent floor, you can put a separate sheet of tarp under your tent
before set up.
It is easier to PUSH rather than PULL a fiberglass pole out of a sleeve on the fly sheet or inner
tent.
Please read the tent care instructions attached inside the tent.
31