Advertisement
Quick Links
Advertisement
Related Manuals for Spectra S1
Summary of Contents for Spectra S1
- Page 1 Assembly...
- Page 2 Depending on what’s wrong, an improperly assembled pump can either not work at all, or work incorrectly risking irreparable damage to the motor. Assembling the Milk Collection Kit Follow these instructions if you have the Spectra S1, S2, S9 plus, or M1.
- Page 3 Assembling the Backflow Protector Correctly assembling the backflow protector is so important. It prevents milk and moisture from entering your tubing which can cause irreparable damage to the motor, or worse, mould! Ensure that the backflow protector has been sterilized and allowed to completely dry on a clean paper towel prior to assembly.
- Page 4 Milk Collection Kit for the Dew 350 The Dew 350 adheres to a slightly different assembly process than the other pumps. The major difference is that instead of backflow protectors, the milk collection kit uses backflow filters between the pump and the tubing to prevent moisture from entering the motor (see image below).
- Page 5 (in fact, the two are interchangeable, meaning you can use either the silicone duck valves or the membrane & valve sets with any of your Spectra breastshields). To assemble, make sure the tab on the underside of the membrane is inserted into the matching tab on the valve (the half-circle shaped hole).
- Page 6 Assembling the Power Adaptor The power adaptor that comes with the S1, S2, S9 Plus and M1 will need to be assembled (note that the Dew 350 comes with an integrated power cable). 1. Connect the power charger and the Australian adaptor by pushing the two components together.
- Page 7 Single or Double Pumping All of the Spectra electric breast pumps are capable of both single and double pumping. They each come with two milk collection kits to give you everything you need to double pump. However, there are some situations you might prefer to single pump (e.g.
- Page 8 Double Pumping with the M1 The M1 is fully set-up for single pumping out of the box. Simply insert the tubing firmly onto the air port. For double pumping, each pump kit comes with a small splitter in the bag (there should be 2 in each box). Insert the splitter directly into the air port.
-
Page 9: Need Assistance
If you need more assistance, please contact customer support, or, take a look at our website which is frequently updated to include the latest information, guides, tips & tricks to help you get the most out of your Spectra breast pump. - Page 10 Copyright 2017 Spectra Baby Australia...
Need help?
Do you have a question about the S1 and is the answer not in the manual?
Questions and answers