Advertisement
Installation Procedure
Lefroy Brooks always recommends that plumbing products be installed by a licensed professional.
Shut off main water supply before installation.
Thermometer
4
Turn on the flow controller. Turn the thermostatic cartridge untill you get the water temperature
at 38°C.
5
Turn off the water supply. Install the stopper and make sure its "H" plane as the figure
mentioned is horizontal and on the left side.
6
Attach the adaptor and handle onto the valve. When the adaptor is fixed, the temperature-limit-
button (38°) is at horizontal position.
H
4
6
Steps 4-6
5
5
Advertisement
