Innova FIESTA 1001 Instruction Manual

Contents of Accessory box 1001-HRK

SCREW BAG 140-0008
A B C D E
x8 x8 x8 x16 x12
Install the step on a flat surface.
Do not jump or dive from the step.
Remove the step from water when temperatures drop below freezing.
In winter, the step should be stored in an area protected from snow.
Never lift the step by its handrails.
Use BATTERY operated tools to avoid electric shock near water.
Ensure no corrosive materials are added to the step or harware kit.
The step must be installed per manufacturer's instructions.
File off all stripped or sharp edges before assembly to avoid injuries
and liner damage.
The manufacturer is not responsible for damages or injuries caused
by improper installation or use of product.
To ease the installation of handrails and bolts, use a screwdriver to
line up the holes.
A
1) Insert the four posts into the
step and secure them in place with
the bolts, washers, and nuts
provided.
2) Insert the deck supports over
the two rear posts. Do not secure.
3) Insert the handrails onto the
posts and secure them with the
screws provided.

Useful tip!

To ease the installation of
handrails and bolts, use a
Phillips screwdriver to line
up the holes.
A B C
x8 x8 x8
FIESTA / OPERA WITH DECK
Fiesta #1001 Shell
x4
x4
x2
x2
x1
x2

WARNING

2257 route 139
Drummondville, Québec
J2A 2G2
WWW.INNOVAPLAS.COM
Opera #1016 Shell
Required tools
D
x8
MANUFACTURER WARRANTY
REV. 03/05/2020
(not included)
Sand
(not included)
Phillips #2
7/16 wrench
Phillips #3
FIESTA 1001
OPERA 1016
1 year on pool step.
1 year on hardware.
PN:
Phillips bit
PG:1