Advertisement
WARNING – PLEASE READ FIRST
Do not put hand near moving parts (heat blade or heat
plate)
)
Remove all obstacles which may interfere with machine
functions
Keep work area clean and clear of clutter
Do not sit or stand on machine
Disconnect from power source before performing
maintenance on the machine
When machine is not in use, please clean and store properly
Do not place any electrical parts or plug/cord in water
The cord should be away from heat
Machine may have sharp or pointed edges, use caution
when cleaning
when cleaning
Machine should only be operated by personnel who can
read, understand and respect warnings and instructions
regarding this machine and the manual
OPERATING TIPS
Check the film rollers to ensure screws are tight
Adjust the stopper for film as needed
When machine is turned "ON", make sure the pilot lamp
inside the main switch is on
Allow 5-10 minutes for the heat blade and heat plate to
reach the correct temperature
Turning the temperature to the highest setting will shorten
the life of the heaters
, p
p p
y
HAND WRAPPER
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
MODEL: U-450
Advertisement
Table of Contents
Related Manuals for Sealer Sales U-450
Summary of Contents for Sealer Sales U-450
- Page 1 Do not put hand near moving parts (heat blade or heat OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS plate) MODEL: U-450 Remove all obstacles which may interfere with machine functions Keep work area clean and clear of clutter Do not sit or stand on machine...
- Page 2 SPARE PARTS DIAGRAM LOADING FILM Draw film through the bottom of the front roller. See diagram. HOW TO OPERATE Put your package on the working table. Draw film and over your package with the film Pull your package and film forward. Cut the film with the heat blade by pushing down Press film against the bottom of the package and weld the film on the heat plate.
Need help?
Do you have a question about the U-450 and is the answer not in the manual?
Questions and answers