Datalogic 94ACC0163 Instructions

INSTRUCTIONS
94ACC0163 Antenna, Roof Mount Dome, 4 dBi, 2.4 to
5.9 GHz

General Features

Antenna, Roof Mount Dome, 4 dBi, 2.4 to 5.9 GHz extends W-Lan connectivity of VMC.
The pack contains the following components
•
1x Top cover 50mm with RP TNC
connector
•
1x Antenna cable RP-TNC, N 3 m

Assembling of Omnidirectional calotte 4 dBi, 2.4 to 5.9 GHz

Screws not
included

Connect Omnidirectional calotte 4 dBi, 2.4 to 5.9 GHz with VMC

Rhino II
Antenna
©2017 Datalogic S.p.A. and/or its affiliates. All rights reserved.
Datalogic and the Datalogic logo are registered trademarks of
Datalogic S.p.A. in many countries, including the U.S. and the E.U.
Rhino is a trademark of Datalogic S.p.A. and/or its affiliates. All other
brand and product names may be trademarks of their respective
owners.
www.datalogic.com
•
1x Omnidirectional calotte 4 dBi, 2,4 to
5,9 GHz, N
The Omnidirectional calotte 4 dBi, 2.4 to 5.9
GHz must be installed via 2 screws. The
maximum diameter of the screws shouldn't be
taller than 4 mm. To connect the antenna cable
RP-TNC, N 3 m properly there must be a whole
with a diameter between 35 mm to 40 mm.
The connector with the smaller outer diameter
must be connected to the VMC.
The connector with the bigger outer diameter
must be connected to the Omnidirectional calotte
4 dBi, 2.4 to 5.9 GHz