Samsung SWA-9000S User Manual page 10

4. Turn off the Soundbar
Turn off the Soundbar using the Soundbar's remote control or by pressing the
on the main Soundbar unit.
• The image of the Soundbar may differ from your Soundbar, depending on the model.
5. Configure "ID SET" using the Soundbar's remote control
Press the VOL button on your remote control for 5~6 seconds until the "ID SET" message appears
on your Soundbar's display.
• Steps for "ID SET" may vary by the Soundbar model. Please read manual for your Soundbar.
If the manual does not provide "ID SET" instructions, follow steps described in the image below.
5 Sec
• The image of the Soundbar may differ from your Soundbar, depending on the model.
6. Turn on the Soundbar
Turn on the Soundbar using the Soundbar's remote control or by pressing the
the main Soundbar unit.
• Some Soundbar models will be automatically powered on after completing "5. ID SET" step.
• The image of the Soundbar may differ from your Soundbar, depending on the model.
ENG - 10
(Power) button
BYE
ID SET
(Power) button on
ON