Page 1
Boswell E/C King Storage bed Assembly Hardware included in headboard carton to attach bed feet . Φ8 MM H=10CM Φ8*70 MM 8PCS 4PCS 8PCS Step#1 Retrieve bed feet from carton fastened behind the headboard. Attach bed feet (F) to the headboard using Wrench (I), Bolt (R) and Washer (E).
Page 2
Boswell E/C King Storage bed Assembly Hardware included in side rails carton to attach center support system.. Φ6 MM Φ8 MM Φ8 MM H=27CM Φ8*50MM Φ6*40MM 5PCS 4PCS 5PCS 4PCS 5PCS 26PCS 2PCS 39PCS 4PCS *Bolt B and *Bolt B and Washer E...
Page 3
Boswell E/C King Storage bed Assembly Hardware included in side rails carton to attach center support system. Φ6 MM Φ8 MM Φ8 MM H=27CM Φ8*50MM Φ6*40MM 5PCS 4PCS 5PCS 4PCS 5PCS 26PCS 2PCS 39PCS 4PCS *Clip Q are factory installed* Step#5 Locate bed in final position before attaching center supports.
Page 4
Boswell E/C King Storage bed Assembly Hardware included in storage drawer carton. Φ6*15MM Φ6 MM Φ8 MM H=8 CM 16PCS 16PCS 8PCS Step#8 Attach casters (H) to the drawer using Wrench (I), Bolt (A) and Washer (D). Step#9 Attach drawers to the footboard using Wrench (I), Bolt (B) and Washer (E)(factory installed).
Page 5
Boswell E/C King Storage bed Assembly *Factory installed guide rail keeps drawer centered* Step#10 Insert/Roll the drawer under the bed. Factory installed guide rail keeps drawer centered. CONGRATULATIONS ON YOUR NEW BED PURCHASE ~Warning:do not move bed after final assembly as it may result in damages to floor and/or bed.~...