Kohs & Company Pennsylvania Railroad GG-1 Locomotive Operation And Maintenance Instructions

BELL AUX 1
HORN BLOWERS
(Control Box Face Plate and Functions)
NOTE: DO NOT ATTEMPT TO RAISE OR LOWER THE PANTOGRAPHS MANUALLY BY HAND,
DAMAGE WILL RESULT. IF THE LOCOMOTIVE SOUND SYSTEM SWITCH IS LEFT ON, THE
BATTERIES WILL BE DRAINED OF POWER EVEN IF ALL SOUND EFFECTS ARE TURNED
OFF.

LOCOMOTIVE CARE AND MAINTENANCE

SERVICE

Revision: 3/24/00
AUX 2 FRONT PAN REAR PAN
SOUND AUX 3 ALT
Pennsylvania Railroad GG-1 Locomotive
OPERATION AND MAINTENANCE INSTRUCTIONS
The Kohs & Company Pennsylvania Railroad GG-1 locomotive is an exact scale replica of the
original prototype. It is constructed of formed and fabricated brass and incorporates many scale
operational features. Although the model is very sturdily built, the body shell, pantographs and
particularly the detailing are very susceptible to damage by rough or careless handling. To
prevent damage, please exercise great care in unpacking and handling the model. The locomo-
tive is best handled by lifting under the main frames on both sides at the center of the model,
when touching the painted surfaces, be advised to wear the supplied gloves to protect the finish.
This locomotive model is designed to operate on Direct Current (DC) electricity. Any application
of Alternating Current (AC)
. Kohs & Company will not be responsible for damage caused by the
application of AC power to the model. We will offer further power supply specifications under
the heading of 'Power Supply Requirements', please make note of these recommendations.
Before unpacking, handling or operating this model
. This is a small investment of time to protect your substantial financial
investment and to prevent unnecessary disappointment and frustration.
© 2000 by Kohs & Company, Inc - Clarkston, Michigan 48348