Direct-To Operation; Selecting An Approach - Avidyne IFD540 Quick Reference

QUICK REFERENCE IFD540

Direct-To Operation

1 2
Press the Direct-To To enter a different
button to display a waypoint, tap the data
green Direct-To dialog field in the top dialog
box pre-populated box. The QWERTY
with a logical waypoint keyboard appears for
(powered by Geofill™). you to enter the desired
waypoint identifier.
6
avidyne.com | 800.AVIDYNE
TAB
3
To approve, tap the
'Activate' dialog box to
select. Pressing ENTR
or the right knob can
also be used to confirm.

Selecting an Approach

1
To display the
Approach field of the
next destination, press
the "PROC" Function
key.* This will display a
dropdown list of available
published approaches.
*Pressing the "PROC" Function key a second time will move the cursor
over the Arrival field and present a drop down list of available published
arrivals. Each subsequent press of the "PROC" key will step through all
following destination airfield approaches/arrivals in the flight plan, and
wrap back around to the origin. When the drop down box appears over
the intended data field, tap the desired procedure to add to the flight plan.
TAB
2
To select the desired
Approach, twist
the FMS knob to
scroll, then push to
select, or tap the
highlighted selection.
7