Inserting A Waypoint - Avidyne IFD540 Quick Reference

QUICK REFERENCE IFD540
FMS Flight Plan Introduction
1 2
Following power- We recommend to tap
on, the first time the the "Map" side tab to
"FPL" tab of the FMS view the moving Map
page is accessed, display while entering
an empty flight plan your flight plan.
page is presented with
the origin waypoint
pre-populated.
This FMS uses a database of published airways to quickly build
long flight plans. Here's how: When a flight plan waypoint is a valid
airway entry point, a dropdown list of available airways appears.
Scroll to the desired exit point, and all intermediate intersections
along that airway are automatically populated into the flight plan.
4
avidyne.com | 800.AVIDYNE
TAB
3
The origin will be the
closest airport to the
current GPS position,
or the airport from the
previous power down
if GPS position has
not locked on yet.

Inserting a Waypoint

1 2
To add a waypoint Use the right
to your flightplan, knobs or tap
tap the empty the identifier
space where your to display
cursor is below the QWERTY
'Origin.' The IFD keyboard in
will present a order to enter
new waypoint the waypoint
with a suggested identifier.
identifier (powered
by Geofill™).
TAB
3
Push the right
knob, press
ENTR, or tap
the ENTR key
on the QWERTY
keyboard to
enter the new
waypoint into
the flight plan.
5