1. Manuals
  2. Brands
  3. Meech Manuals
  4. Industrial Equipment
  5. 200 Series
  6. Operating manual

Meech 200 Series Operating Manual

Ion gun
Hide thumbs Also See for 200 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Operating
Manual
Model 251
Ion Gun

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 200 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Meech 200 Series

Summary of Contents for Meech 200 Series

  • Page 1 Operating Manual Model 251 Ion Gun...

  • Page 3: Table Of Contents

    Products shown in this document may be covered by one or more patents, patents applied for and/or registered designs and/or trade marks. For further information please refer to our Head Office or visit www.meech.com. © Meech Static Eliminators Ltd., 26.10.2017...

  • Page 5: Introduction

    Description The Meech Model 251 Ion Gun is a robust, light weight moulded product for use with the Meech Model 233v3 Pulsed DC Controller. It is suitable for contamination blow- off and neutralisation of static charges in electronic applications and in cleanroom environments.

  • Page 6: Installation And Use

    Installation and Use The Model 251 Ion Gun should be connected to the Model 233v3 Pulsed DC Controller. Connect each of the male plugs at the end of the HV cables of the Model 251 to the high voltage sockets of the 233v3 Pulsed DC Controller. Connect the 6mm air hose from the Ion Gun to the air socket on the rear panel of the Model 233v3 Controller.

  • Page 7: Maintenance

    If the pins are worn and require replacement, the pins should be removed using a pair of round nose pliers and replacements fitted. Replacement pins are available from Meech, item code A-200-EMITP-10/1.0 The exterior of the Ion Gun should be kept clean by wiping with a damp cloth.

  • Page 8: Technical Specification

    For Best Results Keep the target area clear and free from obstructions to the ion flow Keep the work area clear of all static generative materials. Use only approved static control grounding methods and material handling equipment. By properly using ionised air, all static potentials in the work area are greatly reduced, even when humidity levels decrease.

  • Page 9: Calibration And Balance Verification

    Whilst no danger to personnel exists, it is essential that high voltage ionising equipment makes no contact with water or water based fluids. Should such an event occur, disconnect immediately and return equipment to Meech for water damage assessment. Cable Plugs...

  • Page 10: Repairs And Warranty

    Include a note stating the nature of the problem as specifically as possible, and also include instructions for returning the Ion Gun to you. Meech will pay one-way return surface shipping costs on any repairs covered under the warranty.

  • Page 11: Ce Approval

    CE Approval An EC Declaration of Conformity for this product exists in respect of the Low Voltage Directive:72/23/EEC (“LVD”) & Electromagnetic Compatibility Directive: 89/336/EEC (“EMCD”) Health and Safety Emission of Ozone: Considerably below international standard of 0.1ppm.
  • Page 12 Meech International Meech Static Eliminators USA Inc Meech Elektrostatik SA 2 Network Point 2915 Newpark Drive Kaiserbaracke 166 Range Road, Witney Norton, OH 44203 B-4780 St.Vith OX29 0YN, UK Belgium Tel: +44 (0)1993 706700 Tel: +1 330 564 2000 / 1 800 232 4210...

This manual is also suitable for:

251

Table of Contents