Bosch VDC-455V03-20 Installation Instructions Manual page 11

FlexiDome | Installation Manual
VF
Figure 4 Surface mounting - rear connection
Solid surface
(three pre-drilled
8mm holes)
Three screws
(supplied with
camera)
Three screws
(M5, supplied)
Raised mounting
When using the surface mounting box:
• With a side connection, remove the cap covering the side entrance.
With a rear connection, leave the cap in place.
• Attach the conduit to the mounting base.
• Make the connection inside the mounting case.
Bosch Security Systems | 2005-11 | V1.0
Conduit
EN | 11
Wires
Cap
Surface
mounting box
(VDA-445SMB)
Camera unit
and base