Keyboard; Use Of Digital Hercules - Idex Fast & Fluid Hercules User Manual

FAST & FLUID MANAGEMENT srl
A Unit of Idex Corporation
A = KEY "START" (35Kg CANS) SLOW SPEED
B = KEY "START" (7Kg CANS) HIGH SPEED
C = KEY "STOP"
D = KEY "+" (TO INCREASE THE STIRRING TIME)
E = KEY "-" (TO DECREASE THE STIRRING TIME)
F = DISPLAY
G = EMERGENCY PUSH BUTTON
H = BUTTON TO UNLOCK CAN HOLDER (WORKING ONLY WHEN MACHINE IS NOT MIXING)
I = IF BUTTON IS PUSHED, THE CAN HOLDER IS FREE FROM BRAKE
10.1 SWITCHING DIGITAL HERCULES ON
10.2 CAN LOADING
1. Open completely the shutter door of the Digital Hercules
2. Open the plates of the Mixer as following:
• Unlock the levers (B) picking up the security block (A) and rotating it of 90°.
• To get the levers (B) in vertical position.
• Rotate the levers in anticlockwise direction to open the plates.
• Position the can on the lower plate of the Digital Hercules. Pay particular attention to the centring:
use as references the concentric demarcations of the lower plate.
• Rotate the levers in clockwise direction to block the can.
• Block the can between the Mixer plates, turn the levers in horizontal position and the security block in the original position.
N.B. Before closing the shutter door, make sure the levers (B) are completely closed, moving the handle (C) lightly
in clockwise and anticlockwise direction and checking the handle itself is locked. Be sure the security block (A) is
parallel to the handle (C).
If the shutter door was stopped by the blocking device, don't force it.
Check the correct positioning of the levers (B) and security block (A).

9. KEYBOARD

10. USE OF THE DIGITAL HERCULES
The shutter door doesn't open when the machine is switched off.
For switchin on the machine turn in position "1" the main switch (positioned on the
back side of the machine).
Verify that the emergency push button (I) is not pushed down (if it is pushed down
error zero "E-0" appears on the display).
1155383H-it,en,es,fr,de - 12/06/2008
16