Terms Of Warranty; General Description; Safety Specifications - Idex Fast & Fluid Hercules User Manual

FAST & FLUID MANAGEMENT srl
A Unit of Idex Corporation
LIMITED WARRANTY: FAST & FLUID MANAGEMENT Srl warrants each unit manufactured to be free of defects in material
and workmanship for a period of twelve months. The part unit shall be returned with transportation charges prepaid. If the
fault has been caused by misuse or abnormal conditions of operation, repairs will be billed at a normal cost. In this case, an
estimate will be submitted before work is started, if requested.
Always include serial number in any correspondence concerning the part unit.
The serial number is located on the back left side of the equipment housing.
This agreement shall be interpreted in accordance with laws of Italy and jurisdiction and venue shall lie with the
courts of Italy as selected by FAST & FLUID MANAGEMENT Srl.
The "user" must keep the Digital Hercules in a proper working condition. Parts and accessories must be
replaced with original FAST & FLUID MANAGEMENT Srl. - parts when they cannot longer guarantee proper
operation.
The manufacturers warranty expires:
twelve months after date of invoicing
* in case of improper use
* in case of non-original spare parts are used
* in case of repair / adaptation of the Digital Hercules without written approval and/or by unauthorized personnel
* in case of non fulfillment of the maintenance-, operation-,or other instructions, like e.g. reflected in this manual
The above conditions are valid in absence of others which were expressly agreed on.
The FAST & FLUID MANAGEMENT Srl high speed Digital Hercules is specially designed for point of sale
color mixing applications as well as for semi industrial applications.
The FAST & FLUID MANAGEMENT Srl high speed Digital Hercules has been designed to meet the demand of the retail market
with a reduced clamping clearance and for the professional market with a maximum clamping clearance of 410 mm.
The unique design enables to reduce maintenance to a minimum and therefore allows color mixing to be performed at a low
cost per liter produced.
The equipment features an automatic clamping and mixing cycle. The user of the FAST high speed paint Digital Hercules can
select the preferred mixing time on a membrane electronic pad.
Use two different stirring velocity for cans: 130 turns/min. e 200 turns /min.
Compliance with security requirements
The machine must be used and serviced by trained personal only, because it is possible that a wrong use can introduce dangers
and cause accidents.
The main areas in which can be present risks are:
Working area
Maintenance area
Power supply
220-240 VOLTAGE: The Digital Hercules must be connected to a voltage of 220 - 240 Volt (or otherwise specified following local
situations), which has a differential (MINIMUM 30mA), a magnetothermic protection of 16 Amp and a grounded outlet
according to local regulations.
115 VOLTAGE: The Digital Hercules must be connected to a voltage of 115 Volt (or otherwise specified following local
situations), which has a differential (MINIMUM 30mA), a magnetothermic protection of 25 Amp and a grounded outlet
according to local regulations.

4. TERMS OF WARRANTY

5. GENERAL DESCRIPTION

6. SAFETY SPECIFICATIONS

WORKING AREA
MAINTENANCE AREA
1155383H-it,en,es,fr,de - 12/06/2008
OPERATOR AREA
13