Gemini CDX-2250i Operation Manual page 2

PLEASE READ BEFORE USING APPLIANCE USING APPLIANCE
IMPORTANT WARNING AND SAFETY INSTRUCTIONS!
CAUTION: This product satisfi es FCC regulations when shielded cables and connectors are used to Wnnecf the unit to other equipment. To prevent
electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
The lightening fl ash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated 'dangerous
voltage" within the product's enclosure that may be of su cient magnitude to constitute a ask of electric shock to persons
READ INSTRUCTIONS: All the safety and operating instructions should be read before the produd is operated.
RETAIN INSTRUCTIONS: The safety and operating instructions should be retained for future reference.
HEED WARNINGS: All warnings on the product and in the operating instructions should be adhered to.
FOLLOW INSTRUCTIONS: All operating and use instructions should be followed.
CLEANING: The produd should be deaned only with a polishing doth or a son dry doth. Never clean with furniture wax, benzine, insecticides or
other volatile liquids since they may corrode the cabinet.
ATTACHMENTS: Do not use attachments not recommended by the product manufacturer as they may cause hazards.
WATER AND MOISTURE: Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink or laundry tub; in a wet basement
or near a Swimming pool; and the like.
ACCESSORIES: Do not place this product on an unstable cart, stand, tripod , bracket, or tab|e. The product may fall causing serious injury to a child
or an adult, and serious damage to the product. Use only with a cart, stand, tripod , bracket, or table recommended by the manufacturer, or sold with
the product. Any mounting of the product should follow the manureoturer's instructions, and should use a mounting accessory recommended by the
manufacturer.
CART: A product and cart combination should be moved with care, Quick stops, excessive force, and uneven surfaces may cause the product and
cart combination to over-turn. See Figure A.
VENTILATION: Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and
to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by
placing the product on a bed, sofa, rug, or other similar surface. This produd should not be placed in a built-in installation
such as a bookcase or rack unless proper ventilation is provided or the manufacture instructions have been adhered to.
POWER SOURCES: This produof should be operated only from the type of power source indicated on the marking label.
If you are not sure of the type of power supply to your home, consult your product dealer or local power company.
LOCATION: The appliance should be installed in a stable location.
NON-USE PERIODS: The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time.
GROUNDING OR POLARIZATION:
• If this product js equipped with a pola zed alternating current line plug (a plug having one blade wider than the other), it will fi t into the outlet
only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug.
If the plug should still fail to fi t, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized
plug.
• If this product is equipped with a three-wire grounding type plug, a plug having a third (grounding) pin, it will only fi t into a grounding type
power outlet. This is a safely feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the grounding type plug.
POWER-CORD PROTECTION: Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.
OUTDOOR ANTENNA GROUNDING: If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is
grounded so as to provide some protection against voItage surges and built-up static charges. Article 810 of the National Electrical Coce, ANSI/
NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, Iocation of antenna-discharge unit, connection to grounding electrodes and requirements
for the grounding electrode. See Figure B.
LIGHTNING: For added protection for this product during a lightening storm, or when it is left unattended and unused
for long periods of time , unplug if from the wall outlet and disconnect tbe antenna or cable system. This will prevent damage to
the product due to lightening and power-line surges.
POWER LINES: An outside antenna system should not be lcoated in the vicinity of overhead power lines or other
electric Iight or power circuits, or where if can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep fromtouching such power lines or circuits as contact with them
might be fatal.
OVERLOADING: Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result
in a risk of fi re or electric.
OBJECT AND LIQUID ENTRY: Never push objects of any kind into this product through openings as they may touch dangerous
voltage profi ts or short-out parts that could result in a fi re of electric shock. Never splill liquid of any kind on the product.
SERVICING: Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualifi ed service personnel.
DAMAGE REQUIRING SERVICE: Unplug this product from the wall outlet and refer servicing to qualifi ed service personnel
under the tolfowing conditions:
• When the power-supply cord or plug is damaged
• If liquid has been spilled, or objects have fallen into the product.
• If the product has been exposed to rain or water.
• If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered
by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a
qualifi ed technician to restore the product to its normal operation.
• If the product has been dropped of damaged in any way.
• When the product exhibits a distinct change in performance, this indicates a need for service.
REPLACEMENT PARTS: When replacement parts are required, be sure the service technician has used replacement parts specifi ed by the
manufacturer or have the same characteristics as the original part. Unauthorized substituions may result in fi re, electric shock or other hazards.
SAFETY CHECK: Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that
the product is in the proper operating condition.
WALL OR CEILING MOUNTING: The product should not be mounted to a wall or ceiling.
HEAT: The product should be situated away from heat sources such as radiators. heat registers, stoves, or other products (including amplifi ers) that
produce heat.