Usage Notes - kobi LED WL User Manual

ASSEMBLY:
1. Mount the fixture holders by screwing them to the fixed substrate.
2. Fix the luminaire by sliding it into the guide.
3. Connect the AC power cord to the mounted luminaire and turn on the luminaire using the switch.
4. Each LED WL luminaire is protected at its end with a cap, after its removal it is possible to make a serial connection of other luminaires
with maximum power consumption not exceeding 120W.

USAGE NOTES:

1. You cannot open or replace parts of the luminaire on your own. It is also forbidden to paint the binding or attach additional elements
to it.
2. Please make sure that the place of luminaires use does not interfere with any fire regulations.
3. The luminaire should be mounted only in a dry place and used for its intended purpose, without causing dangerous situations while
using it.
4. While installing the luminaire or cleaning it, please make sure that the power supply is turned off.
5. From time to time, wipe the lamp from dust using a suitable agent and a dry cloth.
6. To avoid discoloration on the casing, do not use strong cleaning agents, eg alcohol-based.
7. Under any circumstances it is forbidden to cover the luminaire. It must have an access to the free flow of the air.
8. The mounting of the luminaire should be carried out only by a person with appropriate electrical qualifications.
9. It is advisable to use an overvoltage protector for LED power supply systems on the power supply line.
10. In the event of a product failure - please disconnect the power supply, disassemble the luminaire and then contact the supplier.
In accordance to European Directive 2012/19/EU regarding electrical equipment and electronic equipment, used out electrical
equipment should be collected separately and handed on for recycling. You can find out about the utilization possibilities of a
worn out device in the appropriate city or commune office.