Time Based Drying-Minutes - Beko BWD7541IG User Manual

5.12 Drying steps
5.12.1 Iron Dry
Drying is performed until the drying level
reaches Iron Dry. It leaves clothes damp
to touch so makes ironing easier.
5.12.2 Cupboard Dry
Drying is performed until the drying level
reaches Cupboard Dry. Clothes are dried
enough to put straight in the cupboard.
5.12.3 Extra Dry
Drying is performed until the drying level
reaches Extra Cupboard Dry. A longer program
for multi-layered or thick fabrics to be dried.
eg bedsheets, towels, bathrobes & blankets.
C
INFORMATION
• Dryness level may change according
to the mixture, material types, amount
and dampness level of the laundry.
• Items which contain accessories such
as lace, tulle, stones, beads, spacer,
wire, etc. and high silk-content items
should not be dried in the machine.

5.12.4 Time based drying-minutes

In order to reach the desired drying level
at low temperature, you select any of 30,
90 and 150 minutes of drying periods.
C
INFORMATION
• When drying small amount of laundry
(up to maximum 2 pieces), timed-drying
steps in the Cottons or Synthetics drying
programmes should be selected.
• If the laundry is not at the desired
dryness level at the end of the drying
programme, timed-drying can be
selected to finish the process.
• When this function is selected, machine
performs drying for the adjusted time
irrespective of the drying level.
28 / EN
5.13 Time display
Remaining time for the completion of the
programme while it is running is displayed
as "01:30" in hours and minutes format.
C
INFORMATION
• Programme time may differ from the values
in section "Programme and consumption
table" depending on the water pressure,
water hardness and temperature, ambient
temperature, amount and the type of
laundry, auxiliary functions selected and
the changes at the mains voltage.
5.14 End Time
With the End Time function, the startup of the
programme can be delayed up to 24 hours. After
pressing End Time button, the programme's
estimated ending time is displayed. If the End
Time is adjusted, End Time light illuminates.
In order for the End Time function is activated
and the programme is completed at the
end of the specified time, you must press
Start / Pause button after adjusting the
time. Start / Pause button stops flashing
and remains illuminated continuously.
If you want to cancel End Time function,
press End Time button until the End
Time light turns off or press On / Off
button to turn off and on the machine.
1. Open the loading door, place the
laundry and put detergent, etc.
2. Select the washing programme,
temperature, spin speed and, if
required, the auxiliary functions.
3. Set the end time of your choice
by pressing the End Time button.
End Time light is illuminated.
4. Press Start / Pause button. Time countdown
starts. ":" symbol in the middle of the
end time on the display starts flashing.
Washer-Dryer / User Manual