Table of Contents
Advertisement
DS-MDS003 Dock Station (For DS-MCW405/32G/GPS/WIFI Body Cameras) Quick Start Guide
2. Install the host.
1) Align the host side edge to the stripe screen print edge on the hanging bracket, and align the two
installation holes on the host rear panel to the two M6 stepped screws fastened on the vertical
direction of "Host" screen print of the hanging bracket.
2) Push the host and slide it down to make the screws slide to the fixed positions.
3. Install dock station A.
1) Align the top and bottom edges of dock station A to those of the host, and align the side edge to
the stripe screen print edge on the hanging bracket.
2) Align the two installation holes on the rear panel of dock station A to the two M6 stepped screws
fastened on the vertical direction of "Dock A" screen print of the hanging bracket. Slide it leftward
to make the screws slide to the fixed positions.
QSG DS-MDS003 0415221NA
Figure 6, Install Hanging Bracket-Wall Mount
Figure 7, Install Host
12
Advertisement
Table of Contents
