Page 1
Network Traffic Camera • User Manual Dock Station Quick Start Guide...
Page 2
The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (http://www.hikvision.com).
Page 3
Dock Station • Quick Start Guide Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
Page 4
Dock Station • Quick Start Guide Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Provides additional information to emphasize or supplement important points of the main text. Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results.
Page 5
Dock Station • Quick Start Guide To avoid heat accumulation, good ventilation is required for a proper operating environment. Store the device in dry, well-ventilated, corrosive-gas-free, no direct sunlight, and no heating source environment. Avoid fire, water, and explosive environment when using the device. ...
Page 6
Dock Station • Quick Start Guide DO NOT disconnect the power during formatting, uploading, and Data downloading. Or files may be damaged.
Dock Station • Quick Start Guide Chapter 1 Introduction Introduction Dock station works with Digital Evidence Management System (hereinafter referred to as software). It provides you a simplified way to access, back up, store data, and play audio and video files in body camera.
Page 9
Dock Station • Quick Start Guide 1:Dock station cradle. 2:Indicator. 3:Power switch/ Power indicator. 4:Reset. 5:HDD indicator. 6:Network connection indicator. 7:Network transmission indicator. Rear View There are audio input, audio output, switch, power plug, HDMI interface, VGA interface, LAN interface, and USB interface in rear.
Dock Station • Quick Start Guide Chapter 2 Installation Packing List You are recommended to check the objects in the package. Please contact us or suppliers if anything is damaged or lost. Install Driver Software Digital evidence management system is installed in dock station in default. Double select “Digital Evidence Management System.exe”...
Dock Station • Quick Start Guide Chapter 3 Activation For the first access, you need to activate the device by setting an admin password. No operation is allowed before activation. Double select Digital Evidence Management System shortcut. Select Start Configuration. Select language.