Advertisement
The OMNI unit may mount onto the shelf
shown inside the cabinet, on the underside
of the top of the cabinet, or on the cabinet
door. The OMNI unit should be mounted so
that the cables cannot drain water down and
into the OMNI unit.
The antenna cable can route out through the
louvers of the cabinet, and the OMNI power
wires (Red and Black) pick up BATTERY+
and DC GND from the customer connection
area at the bottom of the cabinet.
For reference, this is the
PowerZone Synch Control. No
connection from the OmniMetrix
monitor is made to this panel.
Customer Connection Area
www.omnimetrix.net ▪
sales@omnimetrix.net
4295 Hamilton Mill Road, Suite 100 ▪ Buford, GA 30518 ▪
770-209-0012
Generac PowerZone Modbus TCP
Configuration Guide
IM-815-02
04-MAR-2020
Advertisement
