Advertisement
User instructions
PROGRAM DELAY
The PROGRAM DELAY
washing program by from 1 to 12/24 hours depending on the model. This
option allows the dishwasher to be operated at the time of day of the user's
choice. The first time the PROGRAM DELAY
option light comes on and 1:h appears on the DISPLAY. The button can then
be pressed again, to set the delay required (
pressed for a few seconds, the DISPLAY shows the time left (time remaining)
to the end of the selected program (e.g.
+ program delay). When the user confirms the program start (read the relative
section) a prewash will be carried out, after which the PROGRAM DELAY set
will begin, and the time remaining on the DISPLAY will gradually be counted
down. At the end of the delay set, the option light goes out and the washing
cycle starts.
N.B.: It is not possible to select the PROGRAM DELAY option once the
cycle has begun.
Chosen the delay, proceed with the program start, press the button
START/PAUSE
start to flash.
The machine will perform a dish pre-washing, and when finish, the "delay
program" will enter in function as it was first set.
In case you want to put to zero the "delay program" within the running
program it is necessary:
to press the START/PAUSE
START/PAUSE (D) symbol remain lid up on the display;
to press the DELAY PROGRAM
the delay program (START/PAUSE symbol shut off);
to press the START/PAUSE
N.B.: It is not possible to select the "delay program" when the program
have already began.
button can be pressed to delay the start of the
5:40
for same seconds until the START/PAUSE symbol
smeg-tr.com
button is pressed the
2:h, 3:h
, ... etc.). If no button is
, duration of the washing cycle
button for some seconds until the
more times until the reset of
button to make start the program.
11
Advertisement
