Figure 3-2 Rear Panel Electrical Connectors Ac And Dc Units - Teledyne 3190 Operating Instructions Manual

Trace Oxygen Analyzer
Figure 3-2 Rear Panel Electrical Connectors for AC and DC Units
Analog Outputs: There are three DC output signal connectors with
screw terminals on the panel. There are two wires per output with the
polarity noted. See Figure 3-3. The outputs are:
0–10 V Concentration: Voltage rises with increasing oxygen
Teledyne Analytical Instruments
concentration, from 0 V at 0 percent oxygen to 10
V at full scale percent oxygen. (Full scale = 100%
of programmed range.)
Installation
19