Page 2
INFO OF MACHINE “Clean” Button Connect Gun Inlet Main Air “Dry Off” Inlet Button Switch Air Cap Receiver Cleaner Brush Cleaner Wastes Carlisle Proprietary...
Page 3
ADVANTAGE Easily Operate Save Time Save Waste Carlisle Proprietary...
FIRST USE Fixed the machine on the wall Carlisle Proprietary...
Page 5
FIRST USE Connect the compress air line to “Main Air” inlet 2、Fix Quick detach 1、 Initial State 3、Connect air line fitting Carlisle Proprietary...
Page 6
PREPARATION Remove the paint CUP Carlisle Proprietary...
Page 7
PREPARATION 1)Turn off 2)Put some 3)Put two the fluid cleaner to suction pipets adjusting knob cleaner bottle to each bottle Carlisle Proprietary...
Page 8
OPERATION Step 1: Connect the gun to air line Carlisle Proprietary...
Page 9
OPERATION Step 2: Put the gun into air cap receiver Carlisle Proprietary...
Page 10
OPERATION Step 3: Remove the switch, Put the gun’s fluid right to cleaner tip Cleaner Carlisle Proprietary...
Page 11
OPERATION Step 4: turn on “clean” button ,waiting 4 seconds, until clean solution to cleaner Cleaner Carlisle Proprietary...
Page 12
OPERATION Step 5: Press the gun trigger 5 seconds, then loose, repeat it for 3 or 5 times. Carlisle Proprietary...
Page 13
OPERATION Step 6:Take the switch to original location, remove gun from cleaner tip, using brush to clean air cap and gun body. Carlisle Proprietary...
Page 14
OPERATION Step 7: turn off the “Clean” Button, turn on the “Dry Off” Button at the same time. Carlisle Proprietary...
Page 15
OPERATION Before After The total cleaning process less than 1 minute! Carlisle Proprietary...
Page 16
Thank You Carlisle Proprietary Carlisle Proprietary...
Need help?
Do you have a question about the DEVILBISS Pro CLEAN 2 and is the answer not in the manual?
Questions and answers