Related Manuals for Mifold Grab-and-Go Child Restraint
Summary of Contents for Mifold Grab-and-Go Child Restraint
- Page 1 Grab-and-Go Child Restraint Age 4 years and upwards Group 2/3 (15-36kg) Approved to ECE R44.04 P/N - 1189 Rev. B...
- Page 2 Store these instructions in as safe*. the slot located on the edge of the mifold Grab- and-Go child restraint. We hope that you are delighted and satisfied...
-
Page 3: Child Restraint Features
Grab-and-Go Child Restraint Features Shoulder Belt Guide Strap Child Restraint Shoulder Belt Guide Lap Belt Guide (RH & LH) Shoulder Belt Guide Buckle Lap Belt Slot (RH & LH) Child Restraint Cushion Lap Belt Guide Release Button (RH & LH) -
Page 4: Safety Instructions
The mifold child restraint is a unique design that Check your highway code as this regulation may vary absorbs some of the forces in a vehicle crash when according to the country. - Page 5 Prepare Your Install your child restraint Child Restraint The seat can be used for a child aged 4 years and above, weighing 15kg – 36kg, securing the child with the adult 3 point seat belt approved to ECE R16. Note: Your child restraint is designed to fit only with a 3 point lap and diagonal seat belt and must not at any time be fitted using only a 2 point lap belt.
- Page 6 Extract the lap belt guides and position Ensure that the shoulder belt guide according to the chart. is positioned above and centred on your child’s shoulder. To access the To shorten or lengthen shoulder belt guide the shoulder belt guide strap, pull open the pull the strap in the shoulder belt guide...
- Page 7 Install Your Child Restraint Position your child sitting upright on the child restraint and if necessary, slide lap belt guides into the position nearest to, but not touching the child’s thigh. Pull out the lap belt guides to check they are locked into position.
- Page 8 WARNING! If the vehicle seat belt tongue is up against the red lap belt guide such that you cannot tighten the seat belt, this condition is unacceptable. You must use a different seat position. To position the shoulder belt guide, attach the shoulder belt guide to the diagonal portion of the vehicle seat belt, by opening the clip and inserting the seat belt.
- Page 9 Pull up on vehicle shoulder belt to remove slack from lap portion of vehicle seat belt and snugly adjust lap belt around child. Check that vehicle lap belt is low on hips and contacting thighs. Remove any twists or seat belt slack by pulling on the lap portion and then the diagonal portion of the adult seat belt.
-
Page 10: Final Checklist
Maintenance advice Final checklist However safe a child seat is, however well The child restraint cover is not removable. In built it is, your child’s safety depends on you case of light staining, clean using a damp cloth carrying out the following checks before every or soapy water. - Page 11 Notice © 2018 Carfoldio Ltd. Carfoldio . mifold ® mifold the Grab-and-Go Child Restraint , are This child restraint is a “Universal” child registered trademarks of Carfoldio Ltd. restraint system. It has been approved in This innovative product is protected by patents...
- Page 12 MEMO MEMO...
- Page 13 Follow us on: enquiry@whitestep.co.uk www.whitestep.co.uk pinterest.com/mifold facebook.com/mifolduk www.twitter.com/mifolduk instagram.com/mifolduk Manufactured by: carFoldio Ltd. Unit 2407, PO Box 6945 London, W1A 6US, England, U.K. Tel: 0800 4714984 (from within the U.K.) Tel: +44 207 866 2385 (International) the Grab-and-Go Child Restraint...
Need help?
Do you have a question about the Grab-and-Go Child Restraint and is the answer not in the manual?
Questions and answers