Replacing The Tractor Assy - TallyGenicom T2265 SprintPro Maintenance Manual

Replacing the Tractor Assy

5.10
Replacing the
Tractor Assy
A
5-24
Instructions for Disassembly and Assembly
– Remove Casing (section 5.1)
– Remove 2nd Tractor Drive "A"
– Remove Support "B" by pressing the two notches ,,B1"
– Spread Part "C" of the side wall outwards and pry the catch "D". Simultaneously
pull the Tractor ASSY carefully outwards.
– Run the same procedure on the other side.
Attention:
When reassembling take care of the fact that the "noses" of the left and right tractor
must be parallel mounted "E". Use a edge of the square shaft as a help.
C
Caution:
For better mounting move wheel ,,E" in right direction while pushing tractor assy in
its proper place.
B
B1
D
E