PLEASE READ THE MANUAL THOROUGHLY PRIOR TO EQUIPMENT SET-UP, OPERATION AND MAINTENANCE. General Safety Tips ⚫ All packaging should be disposed of in accordance with the regulations of local authorities. Keeping all packaging away from children. ⚫ This appliance must be properly installed/positioned on a flat stable surface, away from heat source. Position on a flat, stable surface.
■ Install the unit on strong and leveled surfaces -unit may make unpleasant noises if surface is uneven -unit may malfunction if surface is uneven ■ Install the unit in an indoor, well-ventilated area -unit performs more efficiently in a well-ventilated area -for best performance, please maintain clearance of 30 mm on the back of the unit -outdoor use may cause decreased efficiency and damage to the unit ■...
the control panel based on operation manual inside of cabinet. CAUTION Setting the temperature control to the coldest setting may cause the evaporator coil to freeze and ice up. This will eventually result in a warmer cabinet temperature. LOADING PRODUCT Shelves have been factory-installed for your convenience.
Page 5
■ After unplugging the unit, wait at least 10 minutes before re-plugging it. Failure to do so could cause damage to the compressor. UNPLUG CORD ■ To minimize shock and fire hazards, please do not plug or unplug the cord with wet hands. ■...
REGULAR MAINTENANCE CLEANING THE CONDENSER COIL ■ For efficient operation, it is important that the condenser surface be kept free of dust, dirt, and lint. ■ We recommend cleaning the condenser coil and fins at least once per month. ■ Clean with a commercial condenser coil cleaner, available from any kitchen equipment retailer.
TROUBLE SHOOTING Before requesting any service on your unit, please check the following points. Please note that this guide serves only as a reference for solutions to common problems. SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION Compressor not running. Fuse blown or circuit breaker Replace fuse or reset circuit breaker.
Evaporator coil iced over. Cabinet is noisy. Loose part(s). Locate and tighten loose part(s). Tubing vibration. Ensure tubing is free from contact with other tubing or components. Caution! Consult repair manual/owner’s guide before attempting to install or service this product. All safety precautions must be followed.
Page 9
specification set by international, independent, and federal authorities. Products have been approved to carry the following symbol:...
Need help?
Do you have a question about the HEF546 and is the answer not in the manual?
Questions and answers