Taking A Measurement - Nemtek Fence Meter Manual

5.2

Taking a measurement

• Place the live fence wire in the slot
of the measuring tip, making sure
there is good contact between the
fence wire and the metal strip.
• If there is a voltage pulse in
excess of 150V present on the
wire, the Fence Meter will turn on
automatically and display the fence
voltage, current and if present, the
direction of a possible fault
(see screen layout in section 5).
If the fence voltage is more than
150V, but less than 0.5kV, the
meter will turn on and show 0kV.