Additional Safety Hints - BorMann HOME BAC1800 Owner's Manual

Personal safety
• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool when you
are tired or under the influence of drugs, alcohol or medication. A moment of inattention when operating a power tool may
result in serious personal injury.
• Use safety equipment. Always wear eye protection. Using safety equipment such as a dust mask, non-skid safety shoes, a hard
hat, or hearing protection whenever it is needed will reduce the risk of personal injury.
• Avoid accidental starts. Ensure the switch is in the off position before inserting the plug. Carrying power tools with your finger on
the switch or plugging in power tools when the switch is in the on position makes accidents more likely.
• Remove any adjusting keys or spanners before turning on the power tool. A spanner or key left attached to a rotating part of the
power tool may result in personal injury.
• Do not reach out too far. Keep your feet firmly on the ground at all times. This will enable you retain control over the power tool
in unexpected situations.
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from the power tool. Loose
clothes, jewelry or long hair can become entangled in the moving parts.
• If there are devices for connecting dust extraction and collection facilities, please ensure that they are attached and used
correctly. Using such devices can reduce dust-related hazards.
Power tool use and care
• Do not expect the power tool to do more than it can. Use the correct power tool for what you want to do. A power tool will
achieve better results and be safer if used in the context for which it was designed.
• Do not use the power tool if the switch cannot turn it on and off. A power tool with a broken switch is dangerous and must be
repaired.
• Disconnect the plug from the power source before making adjustments, changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting the power tool accidentally.
• Store power tools, when not in use, out of the reach of children and do not allow people who are not familiar with the power
tool or these instructions to operate it. Power tools are potentially dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or jammed moving parts, breakages or any other feature that might affect the
operation of the power tool. If it is damaged, the power tool must be repaired. Many accidents are caused by using poorly
maintained power tools.
• Use the power tool, accessories and cutting tools, etc., in accordance with these instructions and in the manner intended for the
particular type of power tool, taking into account the working conditions and the work which needs to be done. Using a power
tool in ways for which it was not intended can lead to potentially hazardous situations.
Service
Your power tool should be serviced by a qualified specialist using only standard spare parts. This will ensure that it meets the
required safety standards.

ADDITIONAL SAFETY HINTS

• Do not vacuum any sharp-edged, hot or incandescent materials.
• The appliance should not be exposed to heat. For use with cold ashes only! （≤60 °C）
• Do not vacuum any moist or liquid substances. Never immerse the appliance in water.
• Unplug the appliance form the mains supply socket after use and before every cleaning. Pull the plug, not the mains cable, in
order to disconnect the appliance from the mains.
• Do not put any object into openings. Do not use with any opening blocked. Keep free of dust, lint, hair etc.
• Do not use the vacuum cleaner without dust container or dust filter in place.
• Do not vacuum any flour, cement etc., in order to avoid the overloads.
• The appliance should only be cleaned with a dry or damp cloth; it should never be immersed in water. Do not use any solvents
for cleaning.
• This appliance is intended for domestic use only and not for commercial applications.
• Do not use the mains wire to carry the appliance. Do not pull the mains wire over sharp edges.
ASSEMBLY
Attention! Make sure that the power plug is disconnected from the mains.
• Unfasten the lock tabs on the vacuum container.
• Lift the cover off.
• Check if the filter is assembled well.
• Place the cover back over the container and fasten with the lock tabs.
• Connect the metal nozzle with the suction hose to the suction hole at the container.
3
www.BormannTools.com