BorMann HOME DS1000 Owner's Manual page 4

Thank you for your choice and use of our electronic scale and please carefully read the following operation manual before using it.
1. Please check the weighing performance of the scale before it is used every day and stop to use it if something wrong is found.
2. It is strictly prohibited to overload the scale at any time. If the scale is overloaded, its load cell may be damaged.
3. Please recharge the scale when [LobAt] is seen. Otherwise, the life span of the battery will be affected.
General Description
ACS series electronic scale is adopted by high precision 24 digit A/D chip and water proof load cell with high accuracy. It is featured
by such advantages as proof water, proof moisture, accurate weighing result, quickness, stable performance and reliability. It also
has the function of counting, weighing, speed change and etc. It can be used in the normal condition for weighing and also in the
condition where the quickest weighing and packaging is needed, for example in the production line.
Technical Data
1. Weighing Capacity: 3kg, 6kg, 15kg, 30kg
2. Accuracy Class: III
3. Automatic zero setting when it is on and zero automatic tracing
4. Weighing, displaying the speed change, brightness adjustment and unit change
5. Rechargeable battery shuts down automatically when the voltage is not enough
6. Good performance resisting vibration
7. Power: AC and DC alternatively, DC 6V/5Ah (built –in rechargeable battery)
6. Working Temperature: -10℃-+40℃
7. Water proof and moisture proof
Operation explanation
The scale should be placed in the floor that is stable and flat and can be adjusted to the horizontal position by adjusting four feet
at the bottom of the scale.
Turn on/off: The scale is turned on by pressing 【ON/OFF】key, [SFn-xx] is seen in WEIGHT window, xx for weighing capacity, and
then self-checking goes on, and then the scale can be used after "0"is seen in the window. The scale turns off by pressing 【ON/OFF
】key again
ZERO: When operated, if the zero shift is found, please press 【ZERO】key and then the weight can return to the zero place (Zero
ranges: ≤4%FS, it is not effective when it is tared)
TARE: Press 【TARE】 key and weight is seen as zero. When the lamp for the tare is lit, it displays the net weight. After removing
the weight already put on the scale, it displays the negative weight and then press【TARE】 key and the weighing returns to the
zero and the lamp for the tare is off ( Tare ranges: ≤100%FS，It is not effective when the weight is negative)
LED BRIGHTNESS: The LED brightness can be adjusted by pressing 【FUNCTION】key.
POWER SAVING: The scale will automatically enter into the energy saving status after seconds when the WEIGHT window displays
[ 0.0] and the weighing process is not operated. The backlight for the LCD series products is closed. For the LED
products, it becomes "0".It will automatically resumes to work when operating the weighing.
TURN ON THE BACKLIGHT (for LCD series products)
By pressing and holding 【TARE】 key for three seconds, the backlight is on and turn off the backlight by doing the same way.
4
GB
www.BormannTools.com